diff options
Diffstat (limited to 'host/lib/usrp/dboard/eiscat/eiscat_radio_ctrl_impl.hpp')
| -rw-r--r-- | host/lib/usrp/dboard/eiscat/eiscat_radio_ctrl_impl.hpp | 38 |
1 files changed, 34 insertions, 4 deletions
diff --git a/host/lib/usrp/dboard/eiscat/eiscat_radio_ctrl_impl.hpp b/host/lib/usrp/dboard/eiscat/eiscat_radio_ctrl_impl.hpp index cb45208ce..46b9410cd 100644 --- a/host/lib/usrp/dboard/eiscat/eiscat_radio_ctrl_impl.hpp +++ b/host/lib/usrp/dboard/eiscat/eiscat_radio_ctrl_impl.hpp @@ -54,11 +54,17 @@ public: * Valid antenna values: * - BF: This is the default. Will apply the beamforming matrix in whatever * state it currently is. - * - Rx0...Rx15: Will mux the antenna signal 0...15 straight to this - * channel. Note that this will disable the FIR matrix entirely. + * - RX0...RX15: Will mux the antenna signal 0...15 straight to this + * channel. Note that this will disable the FIR matrix entirely, and will + * also disable contributions from other USRPs. * - BF0...BF15: Will configure the FIR filter matrix such that only the - * contributions from antenna 0...15 are passed to this channel. - * + * contributions from antenna 0...15 are passed to this channel. This + * should produce the same signal as RX0..RX15, reduced by 12 dB (because + * the FIR matri needs to account for bit growth from adding 16 channels) + * - FI$idx: Here, $idx is a number (the filter index, hence the name). + * This will apply filter index $idx to all input channels. Useful for + * testing actual beamforming applications, when the same signal is + * applied to all inputs. * * \throws uhd::value_error if the antenna value was not valid */ @@ -125,6 +131,30 @@ private: const double normalized_gain ); + /*! Directly writes a value to the beam configuration register. + */ + void configure_beams(uint32_t reg_value); + + /*! Controls selection of beams coming from the FIR matrix. + * + * The following values are allowed: + * - 0: We stream the lower 5 beams, plus the neighbours contribution + * - 1: We stream the upper 5 beams, plus the neighbours contribution + * - 2: We stream the lower 5 beams, without the neighbours contribution + * - 3: We stream the upper 5 beams, without the neighbours contribution + */ + void set_beam_selection(int beam_selection); + + /*! Controls if we're using the FIR matrix + * + * If this is false, the beam selection is irrelevant. + */ + void enable_firs(bool enable); + + /*! Enables counter instead of JESD core output + */ + void enable_counter(bool enable); + /*! The number of channels this block outputs * * This is *not* the number of antennas, but the number of streams a single |