diff options
Diffstat (limited to 'host/lib/usrp/dboard/e3xx/e3xx_radio_ctrl_impl.hpp')
| -rw-r--r-- | host/lib/usrp/dboard/e3xx/e3xx_radio_ctrl_impl.hpp | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/host/lib/usrp/dboard/e3xx/e3xx_radio_ctrl_impl.hpp b/host/lib/usrp/dboard/e3xx/e3xx_radio_ctrl_impl.hpp deleted file mode 100644 index 41c2c4594..000000000 --- a/host/lib/usrp/dboard/e3xx/e3xx_radio_ctrl_impl.hpp +++ /dev/null @@ -1,215 +0,0 @@ -// -// Copyright 2018 Ettus Research, a National Instruments Company -// -// SPDX-License-Identifier: GPL-3.0-or-later -// - -#ifndef INCLUDED_LIBUHD_RFNOC_E3XX_RADIO_CTRL_IMPL_HPP -# define INCLUDED_LIBUHD_RFNOC_E3XX_RADIO_CTRL_IMPL_HPP - -# include "e3xx_ad9361_iface.hpp" -# include <uhd/types/serial.hpp> -# include <uhd/usrp/dboard_manager.hpp> -# include <uhd/usrp/gpio_defs.hpp> -# include <uhdlib/rfnoc/radio_ctrl_impl.hpp> -# include <uhdlib/rfnoc/rpc_block_ctrl.hpp> -# include <uhdlib/usrp/cores/gpio_atr_3000.hpp> -# include <mutex> - -namespace uhd { namespace rfnoc { - -/*! \brief Provide access to an E3xx radio. - */ -class e3xx_radio_ctrl_impl : public radio_ctrl_impl, public rpc_block_ctrl -{ -public: - typedef boost::shared_ptr<e3xx_radio_ctrl_impl> sptr; - - //! Frequency bands for RX. Bands are a function of the analog filter banks - enum class rx_band { INVALID_BAND, LB_B2, LB_B3, LB_B4, LB_B5, LB_B6, LB_B7, HB }; - - //! Frequency bands for TX. Bands are a function of the analog filter banks - enum class tx_band { - INVALID_BAND, - LB_80, - LB_160, - LB_225, - LB_400, - LB_575, - LB_1000, - LB_1700, - LB_2750, - HB - }; - - /************************************************************************** - * ATR/ Switches Types - *************************************************************************/ - //! ATR state - enum atr_state_t { IDLE, RX_ONLY, TX_ONLY, FULL_DUPLEX }; - - //! Channel select: - enum chan_sel_t { CHAN1, CHAN2, BOTH }; - - /************************************************************************ - * Structors - ***********************************************************************/ - e3xx_radio_ctrl_impl(); - virtual ~e3xx_radio_ctrl_impl(); - - /************************************************************************ - * API calls - ***********************************************************************/ - - // Note: We use the cached values in radio_ctrl_impl, so most getters are - // not reimplemented here - //! Set streaming mode - active chains, channel_mode, timing_mode - void set_streaming_mode( - const bool tx1, const bool tx2, const bool rx1, const bool rx2); - - //! Set which channel mode is used - void set_channel_mode(const std::string& channel_mode); - - double set_rate(const double rate); - - void set_tx_antenna(const std::string& ant, const size_t chan); - void set_rx_antenna(const std::string& ant, const size_t chan); - - double set_tx_frequency(const double freq, const size_t chan); - double set_rx_frequency(const double freq, const size_t chan); - double set_tx_bandwidth(const double bandwidth, const size_t chan); - double set_rx_bandwidth(const double bandwidth, const size_t chan); - - // gain - double set_tx_gain(const double gain, const size_t chan); - double set_rx_gain(const double gain, const size_t chan); - - size_t get_chan_from_dboard_fe(const std::string& fe, const direction_t dir); - std::string get_dboard_fe_from_chan(const size_t chan, const direction_t dir); - - void set_rpc_client(uhd::rpc_client::sptr rpcc, const uhd::device_addr_t& block_args); - -protected: - //! Map a frequency in Hz to an rx_band value. Will return - // rx_band::INVALID_BAND if the frequency is out of range. - rx_band map_freq_to_rx_band(const double freq); - //! Map a frequency in Hz to an tx_band value. Will return - // tx_band::INVALID_BAND if the frequency is out of range. - tx_band map_freq_to_tx_band(const double freq); - - virtual const std::string get_default_timing_mode() = 0; - - /*! Run a loopback self test. - * - * This will write data to the AD936x and read it back again. - * If this test fails, it generally means the interface is broken, - * so we assume it passes and throw otherwise. Running this requires - * a core that we can peek and poke the loopback values into. - * - * \param iface An interface to the associated radio control core - * \param iface The radio control core's address to write the loopback value - * \param iface The radio control core's readback address to read back the returned - * value - * - * \throws a uhd::runtime_error if the loopback value didn't match. - */ - virtual void loopback_self_test(std::function<void(uint32_t)> poker_functor, - std::function<uint64_t()> peeker_functor) = 0; - - virtual uint32_t get_rx_switches( - const size_t chan, const double freq, const std::string& ant) = 0; - - virtual uint32_t get_tx_switches(const size_t chan, const double freq) = 0; - - virtual uint32_t get_idle_switches() = 0; - - virtual uint32_t get_tx_led() = 0; - virtual uint32_t get_rx_led() = 0; - virtual uint32_t get_txrx_led() = 0; - virtual uint32_t get_idle_led() = 0; - - //! Reference to the AD9361 controls - // e3xx_ad9361_iface::uptr _ad9361; - ad9361_ctrl::sptr _ad9361; - - //! Swap RFA and RFB for catalina - bool _fe_swap; - -private: - /************************************************************************** - * Helpers - *************************************************************************/ - //! Initialize all the peripherals connected to this block - void _init_peripherals(); - - //! Set state of this class to sensible defaults - void _init_defaults(); - - //! Init a subtree for the RF frontends - void _init_frontend_subtree(uhd::property_tree::sptr subtree, const size_t chan_idx); - - //! Initialize Catalina defaults - void _init_codec(); - - //! Initialize property tree - void _init_prop_tree(); - - void _init_mpm_sensors(const direction_t dir, const size_t chan_idx); - - /************************************************************************* - * Sensors - *************************************************************************/ - //! Return LO lock status. Factors in current band (low/high) and - // direction (TX/RX) - bool get_lo_lock_status(const direction_t dir); - - /************************************************************************** - * Misc Controls - *************************************************************************/ - //! Blink the front-panel LEDs for \p identify_duration, - // and resume normal operation. - void _identify_with_leds(const int identify_duration); - - void _set_atr_bits(const size_t chan); - - /************************************************************************** - * Private attributes - *************************************************************************/ - //! Locks access to setter APIs - std::mutex _set_lock; - - //! Letter representation of the radio we're currently running - std::string _radio_slot; - - //! Prepended for all dboard RPC calls - std::string _rpc_prefix; - - //! Additional block args; gets set during set_rpc_client() - uhd::device_addr_t _block_args; - - //! Reference to the RPC client - uhd::rpc_client::sptr _rpcc; - - //! Reference to the SPI core - uhd::spi_iface::sptr _spi; - - //! ATR controls. These control the AD9361 gain - // up/down bits. - // Every radio channel gets its own ATR state register. - std::vector<usrp::gpio_atr::gpio_atr_3000::sptr> _db_gpio; - - // ATR controls for LEDs - std::vector<usrp::gpio_atr::gpio_atr_3000::sptr> _leds_gpio; - - //! Front panel GPIO controller. Note that only one radio block per - // module can be the FP-GPIO master. - usrp::gpio_atr::gpio_atr_3000::sptr _fp_gpio; - - //! Sampling rate - double _master_clock_rate = 1.0; -}; /* class radio_ctrl_impl */ - -}} /* namespace uhd::rfnoc */ - -#endif /* INCLUDED_LIBUHD_RFNOC_E3XX_RADIO_CTRL_IMPL_HPP */ -// vim: sw=4 et: |