3 files changed, 0 insertions, 94 deletions
diff --git a/fpga/usrp3/lib/sim/axi_crossbar/run_iverilog b/fpga/usrp3/lib/sim/axi_crossbar/run_iverilog
deleted file mode 100755
index a23b4e4a9..000000000
--- a/fpga/usrp3/lib/sim/axi_crossbar/run_iverilog
+++ /dev/null
@@ -1,21 +0,0 @@
-
-iverilog \
--s axi_crossbar_tb \
--y ~/XILINX_verilog/ISE/verilog/src/unisims \
--o axi_crossbar_tb \
-~/XILINX_verilog/ISE/verilog/src/glbl.v \
-../../control/axi_crossbar_tb.v \
-../../control/axi_crossbar.v \
-../../control/axi_slave_mux.v \
-../../control/axi_fifo_header.v \
-../../control/arb_qualify_master.v \
-../../control/setting_reg.v \
-../../fifo/monitor_axi_fifo.v \
-../../fifo/axi_fifo_short.v
-
-
-
-#fuse work.axi_crossbar_tb work.glbl -L unisims_ver -L xilinxcorelib_ver -o axi_crossbar_tb.exe
-
-# run the simulation scrip
-#./axi_crossbar_tb.exe -gui #-tclbatch simcmds.tcl
diff --git a/fpga/usrp3/lib/sim/axi_crossbar/run_sim b/fpga/usrp3/lib/sim/axi_crossbar/run_sim
deleted file mode 100755
index 41d07a635..000000000
--- a/fpga/usrp3/lib/sim/axi_crossbar/run_sim
+++ /dev/null
@@ -1,15 +0,0 @@
-vlogcomp -work work ${XILINX}/verilog/src/glbl.v
-vlogcomp -work work ../../control/axi_crossbar_tb.v
-vlogcomp -work work ../../control/axi_crossbar.v
-vlogcomp -work work ../../control/axi_slave_mux.v
-vlogcomp -work work ../../control/axi_forwarding_cam.v
-vlogcomp -work work ../../control/setting_reg.v
-vlogcomp -work work ../../fifo/monitor_axi_fifo.v
-vlogcomp -work work ../../fifo/axi_fifo_short.v
-
-
-
-fuse work.axi_crossbar_tb work.glbl -L unisims_ver -L xilinxcorelib_ver -o axi_crossbar_tb.exe
-
-# run the simulation scrip
-./axi_crossbar_tb.exe -gui #-tclbatch simcmds.tcl
diff --git a/fpga/usrp3/lib/sim/axi_crossbar/simulation_script.v b/fpga/usrp3/lib/sim/axi_crossbar/simulation_script.v
deleted file mode 100644
index 6a89680a5..000000000
--- a/fpga/usrp3/lib/sim/axi_crossbar/simulation_script.v
+++ /dev/null
@@ -1,58 +0,0 @@
-
-
-initial $dumpfile("axi_crossbar_tb.vcd");
-initial $dumpvars(0,axi_crossbar_tb);
-
-   reg [15:0] x;
-   
-   
-   initial
-     begin
-	@(posedge clk);
-	reset <= 1;
-	repeat (5) @(posedge clk);
-	@(posedge clk);
-	reset <= 0;
-	@(posedge clk);
-	// 2x2 Switch so only mask one bit of SID for route dest.
-	// Each slave must have a unique address, logic doesn't check for this.
-	//
-	// Network Addr 0 & 1 go to Slave 0.
-	write_setting_bus(0,0);   // 0.X goes to Port 0
-	write_setting_bus(1,0);   // 1.X goes to Port 0
-	// Local Addr = 2
-	write_setting_bus(512,2);
-	// Host Addr 0 & 2 go to Slave 0...
-	write_setting_bus(256,0); // 2.0 goes to Port 0
-	write_setting_bus(258,0); // 2.2 goes to Port 0
-	// ...Host Addr 1 & 3 go to Slave 1...
-	write_setting_bus(257,1); // 2.1 goes to Port 1
-	write_setting_bus(259,1); // 2.3 goes to Port 1
-	//
-	@(posedge clk);
-	fork
-	   begin
-	      // Master0, addr 0.0 to Slave0
-	      enqueue_vita_pkt(0,10,0,{16'h0,8'h0,8'h0});
-	      // Master0, addr 2.0 to Slave0
-	      enqueue_vita_pkt(0,11,'h12345678,{16'h0,8'h2,8'h0});
-	      // Master0, addr 2.3 to Slave1
-	      enqueue_vita_pkt(0,14,'h45678901,{16'h0,8'h2,8'h3});
-	      // Master0, addr 2.2 to Slave0
-	      enqueue_vita_pkt(0,11,'h67890123,{16'h0,8'h2,8'h2});
-	   end
-	   begin
-	      // Master1, addr 1.0 to Slave0
-	      enqueue_vita_pkt(1,12,'h23456789,{16'h0,8'h1,8'h0});
-	      // Master1, addr 2.1 to Slave1
-	      enqueue_vita_pkt(1,13,'h34567890,{16'h0,8'h2,8'h1});
-	      // Master1, addr 2.3 to Slave1
-	      enqueue_vita_pkt(1,14,'h56789012,{16'h0,8'h2,8'h3});
-	   end
-	join
-	
-	repeat (1000) @(posedge clk);
-	$finish;
-	
-     end // initial begin
-