Merge FPGA repository back into UHD repository

The FPGA codebase was removed from the UHD repository in 2014 to reduce
the size of the repository. However, over the last half-decade, the
split between the repositories has proven more burdensome than it has
been helpful. By merging the FPGA code back, it will be possible to
create atomic commits that touch both FPGA and UHD codebases. Continuous
integration testing is also simplified by merging the repositories,
because it was previously difficult to automatically derive the correct
UHD branch when testing a feature branch on the FPGA repository.

This commit also updates the license files and paths therein.

We are therefore merging the repositories again. Future development for
FPGA code will happen in the same repository as the UHD host code and
MPM code.

== Original Codebase and Rebasing ==

The original FPGA repository will be hosted for the foreseeable future
at its original local location: https://github.com/EttusResearch/fpga/

It can be used for bisecting, reference, and a more detailed history.

The final commit from said repository to be merged here is
05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as
v4.0.0.0-pre-uhd-merge.

If you have changes in the FPGA repository that you want to rebase onto
the UHD repository, simply run the following commands:

- Create a directory to store patches (this should be an empty
  directory):

    mkdir ~/patches

- Now make sure that your FPGA codebase is based on the same state as
  the code that was merged:

    cd src/fpga # Or wherever your FPGA code is stored
    git rebase v4.0.0.0-pre-uhd-merge

  Note: The rebase command may look slightly different depending on what
  exactly you're trying to rebase.

- Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge:

    git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches

  Note: Make sure that only patches are stored in your output directory.
  It should otherwise be empty. Make sure that you picked the correct
  range of commits, and only commits you wanted to rebase were exported
  as patch files.

- Go to the UHD repository and apply the patches:

    cd src/uhd # Or wherever your UHD repository is stored
    git am --directory fpga ~/patches/*
    rm -rf ~/patches # This is for cleanup

== Contributors ==

The following people have contributed mainly to these files (this list
is not complete):

Co-authored-by: Alex Williams <alex.williams@ni.com>
Co-authored-by: Andrej Rode <andrej.rode@ettus.com>
Co-authored-by: Ashish Chaudhari <ashish@ettus.com>
Co-authored-by: Ben Hilburn <ben.hilburn@ettus.com>
Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Derek Kozel <derek.kozel@ettus.com>
Co-authored-by: EJ Kreinar <ej@he360.com>
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Co-authored-by: Ian Buckley <ian.buckley@gmail.com>
Co-authored-by: Jörg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Jon Kiser <jon.kiser@ni.com>
Co-authored-by: Josh Blum <josh@joshknows.com>
Co-authored-by: Jonathon Pendlum <jonathan.pendlum@ettus.com>
Co-authored-by: Martin Braun <martin.braun@ettus.com>
Co-authored-by: Matt Ettus <matt@ettus.com>
Co-authored-by: Michael West <michael.west@ettus.com>
Co-authored-by: Moritz Fischer <moritz.fischer@ettus.com>
Co-authored-by: Nick Foster <nick@ettus.com>
Co-authored-by: Nicolas Cuervo <nicolas.cuervo@ettus.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Paul David <paul.david@ettus.com>
Co-authored-by: Ryan Marlow <ryan.marlow@ettus.com>
Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
Co-authored-by: Sylvain Munaut <tnt@246tNt.com>
Co-authored-by: Trung Tran <trung.tran@ettus.com>
Co-authored-by: Vidush Vishwanath <vidush.vishwanath@ettus.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>

1 files changed, 85 insertions, 0 deletions

diff --git a/fpga/usrp3/tools/make/viv_simulator.mak b/fpga/usrp3/tools/make/viv_simulator.mak
new file mode 100644
index 000000000..add3e651d
--- /dev/null
+++ b/fpga/usrp3/tools/make/viv_simulator.mak
@@ -0,0 +1,85 @@
+#
+# Copyright 2014-2015 Ettus Research
+#
+
+# -------------------------------------------------------------------
+# Mode switches
+# -------------------------------------------------------------------
+
+# Calling with FAST:=1 will switch to using unifast libs
+ifeq ($(FAST),1)
+SIM_FAST=true
+else
+SIM_FAST=false
+endif
+
+# -------------------------------------------------------------------
+# Path variables
+# -------------------------------------------------------------------
+
+ifdef SIM_COMPLIBDIR
+COMPLIBDIR = $(call RESOLVE_PATH,$(SIM_COMPLIBDIR))
+endif
+
+# Parse part name from ID
+PART_NAME=$(subst /,,$(PART_ID))
+
+# -------------------------------------------------------------------
+# Usage: SETUP_AND_LAUNCH_SIMULATION
+# Args: $1 = Simulator Name
+# -------------------------------------------------------------------
+SETUP_AND_LAUNCH_SIMULATION = \
+	@ \
+	export VIV_SIMULATOR=$1; \
+	export VIV_DESIGN_SRCS=$(call RESOLVE_PATHS,$(DESIGN_SRCS)); \
+	export VIV_SIM_SRCS=$(call RESOLVE_PATHS,$(SIM_SRCS)); \
+	export VIV_INC_SRCS=$(call RESOLVE_PATHS,$(INC_SRCS)); \
+	export VIV_SIM_TOP=$(SIM_TOP); \
+	export VIV_SYNTH_TOP="$(SYNTH_DUT)"; \
+	export VIV_PART_NAME=$(PART_NAME); \
+	export VIV_SIM_RUNTIME=$(SIM_RUNTIME_US); \
+	export VIV_SIM_FAST="$(SIM_FAST)"; \
+	export VIV_SIM_COMPLIBDIR=$(COMPLIBDIR); \
+	export VIV_SIM_USER_DO=$(MODELSIM_USER_DO); \
+	export VIV_MODE=$(VIVADO_MODE); \
+	export VIV_SIM_64BIT=$(MODELSIM_64BIT); \
+	$(TOOLS_DIR)/scripts/launch_vivado.sh -mode $(VIVADO_MODE) -source $(call RESOLVE_PATH,$(TOOLS_DIR)/scripts/viv_sim_project.tcl) -log xsim.log -nojournal
+
+.SECONDEXPANSION:
+
+##xsim:       Run the simulation using the Xilinx Vivado Simulator
+xsim: .check_tool $(DESIGN_SRCS) $(SIM_SRCS) $(INC_SRCS)
+	$(call SETUP_AND_LAUNCH_SIMULATION,XSim)
+
+##xclean:     Cleanup Xilinx Vivado Simulator intermediate files
+xclean:
+	@rm -f xsim*.log
+	@rm -rf xsim_proj
+	@rm -f xvhdl.log
+	@rm -f xvhdl.pba
+	@rm -f xvlog.log
+	@rm -f xvlog.pb
+	@rm -f vivado_pid*.str
+
+##vsim:       Run the simulation using Modelsim
+vsim: .check_tool $(COMPLIBDIR) $(DESIGN_SRCS) $(SIM_SRCS) $(INC_SRCS)
+	$(call SETUP_AND_LAUNCH_SIMULATION,Modelsim)
+
+##vlint:	  Run verilog compiler to lint files.
+vlint: .check_tool
+	@vlog $(SIM_SRCS) +incdir+$(BASE_DIR)/../sim/axi +incdir+$(BASE_DIR)/../sim/general +incdir+$(BASE_DIR)/../sim/control +incdir+$(BASE_DIR)/../sim/rfnoc +incdir+$(BASE_DIR)/../lib/rfnoc
+
+##vclean:     Cleanup Modelsim intermediate files
+vclean:
+	@rm -f modelsim*.log
+	@rm -rf modelsim_proj
+	@rm -f vivado_pid*.str
+	@rm -rf work
+
+# Use clean with :: to support allow "make clean" to work with multiple makefiles
+clean:: xclean vclean
+
+help::
+	@grep -h "##" $(abspath $(lastword $(MAKEFILE_LIST))) | grep -v "\"##\"" | sed -e 's/\\$$//' | sed -e 's/##//'
+
+.PHONY: xsim xsim_hls xclean vsim vlint vclean clean help