Squashed B200 FPGA Source. Code from Josh Blum, Ian Buckley, and Matt Ettus.

1 files changed, 26 insertions, 0 deletions

diff --git a/fpga/usrp3/lib/control/settings_bus_crossclock.v b/fpga/usrp3/lib/control/settings_bus_crossclock.v
new file mode 100644
index 000000000..2a6e7e7ef
--- /dev/null
+++ b/fpga/usrp3/lib/control/settings_bus_crossclock.v
@@ -0,0 +1,26 @@
+//
+// Copyright 2011-2012 Ettus Research LLC
+//
+
+
+
+
+// This module takes the settings bus on one clock domain and crosses it over to another domain
+// Typically it will be used with the input settings bus on the wishbone clock, and either 
+// the system or dsp clock on the output side
+
+module settings_bus_crossclock
+  #(parameter FLOW_CTRL=0, parameter AWIDTH=8, parameter DWIDTH=32)
+  (input clk_i, input rst_i, input set_stb_i, input [AWIDTH-1:0] set_addr_i, input [DWIDTH-1:0] set_data_i,
+   input clk_o, input rst_o, output set_stb_o, output [AWIDTH-1:0] set_addr_o, output [DWIDTH-1:0] set_data_o, input blocked);
+
+   wire  nfull, nempty;
+   
+   axi_fifo_2clk #(.WIDTH(AWIDTH + DWIDTH), .SIZE(0)) settings_fifo
+     (.reset(rst_i),
+      .i_aclk(clk_i), .i_tdata({set_addr_i,set_data_i}), .i_tvalid(set_stb_i), .i_tready(nfull),
+      .o_aclk(clk_o), .o_tdata({set_addr_o,set_data_o}), .o_tready(set_stb_o), .o_tvalid(nempty));
+
+   assign set_stb_o = nempty & (~blocked | ~FLOW_CTRL);
+
+endmodule // settings_bus_crossclock