zpu: renamed the directory for the usrp2 fw to zpu to reflect the cpu type

1 files changed, 0 insertions, 25 deletions

diff --git a/firmware/microblaze/lwip/lwip-1.3.1/src/netif/FILES b/firmware/microblaze/lwip/lwip-1.3.1/src/netif/FILES
deleted file mode 100644
index 1c4f5928d..000000000
--- a/firmware/microblaze/lwip/lwip-1.3.1/src/netif/FILES
+++ /dev/null
@@ -1,25 +0,0 @@
-This directory contains generic network interface device drivers that
-do not contain any hardware or architecture specific code. The files
-are:
-
-etharp.c
-          Implements the ARP (Address Resolution Protocol) over
-          Ethernet. The code in this file should be used together with
-          Ethernet device drivers. Note that this module has been
-          largely made Ethernet independent so you should be able to
-          adapt this for other link layers (such as Firewire).
-
-ethernetif.c
-          An example of how an Ethernet device driver could look. This
-          file can be used as a "skeleton" for developing new Ethernet
-          network device drivers. It uses the etharp.c ARP code.
-
-loopif.c
-          A "loopback" network interface driver. It requires configuration
-          through the define LWIP_LOOPIF_MULTITHREADING (see opt.h).
-
-slipif.c
-          A generic implementation of the SLIP (Serial Line IP)
-          protocol. It requires a sio (serial I/O) module to work.
-
-ppp/      Point-to-Point Protocol stack