From 39943a5b0c3c210babfd6e62711ea4bf3133866b Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Mon, 24 May 2010 16:31:23 -0700 Subject: Added support to set GPIO pins from dboard interface: write gpio and set pin control (atr or gpio) Added property to get dboard interface from the dboard obj. --- host/lib/usrp/usrp2/usrp2_regs.hpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'host/lib/usrp/usrp2/usrp2_regs.hpp') diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index feeccaa34..0f675357b 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -204,7 +204,7 @@ #define FR_GPIO_RX_SEL FR_GPIO_BASE + 12 // 16 2-bit fields select which source goes to RX DB // each 2-bit sel field is layed out this way -#define FRF_GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define FRF_GPIO_SEL_GPIO 0 // if pin is an output, set by GPIO register #define FRF_GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic #define FRF_GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric #define FRF_GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric -- cgit v1.2.3