From e4c9656ac267b05e1a19106fb1594f7ac5c37cc7 Mon Sep 17 00:00:00 2001 From: Ashish Chaudhari Date: Fri, 25 Sep 2015 01:42:14 +0000 Subject: usrp3: Added new GPIO ATR 3000 core - Refactored GPIO ATR definitions - Added new 3000 core with a more efficient API - Added a separate db_gpio_atr core to control the ATR bus - Ported b2xx, e3xx and x3xx to the new core - Minor cleanup --- host/lib/usrp/dboard/db_ubx.cpp | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'host/lib/usrp/dboard/db_ubx.cpp') diff --git a/host/lib/usrp/dboard/db_ubx.cpp b/host/lib/usrp/dboard/db_ubx.cpp index 7cb4b2d6b..a8af0f9d8 100644 --- a/host/lib/usrp/dboard/db_ubx.cpp +++ b/host/lib/usrp/dboard/db_ubx.cpp @@ -318,14 +318,14 @@ public: write_gpio(); // Configure ATR - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, _tx_gpio_reg.atr_idle); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _tx_gpio_reg.atr_tx); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, _tx_gpio_reg.atr_rx); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _tx_gpio_reg.atr_full_duplex); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, _rx_gpio_reg.atr_idle); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _rx_gpio_reg.atr_tx); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _rx_gpio_reg.atr_rx); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _rx_gpio_reg.atr_full_duplex); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, _tx_gpio_reg.atr_idle); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _tx_gpio_reg.atr_tx); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, _tx_gpio_reg.atr_rx); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _tx_gpio_reg.atr_full_duplex); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, _rx_gpio_reg.atr_idle); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _rx_gpio_reg.atr_tx); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _rx_gpio_reg.atr_rx); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _rx_gpio_reg.atr_full_duplex); // Engage ATR control (1 is ATR control, 0 is manual control) _iface->set_pin_ctrl(dboard_iface::UNIT_TX, _tx_gpio_reg.atr_mask); -- cgit v1.2.3