From e4c9656ac267b05e1a19106fb1594f7ac5c37cc7 Mon Sep 17 00:00:00 2001 From: Ashish Chaudhari Date: Fri, 25 Sep 2015 01:42:14 +0000 Subject: usrp3: Added new GPIO ATR 3000 core - Refactored GPIO ATR definitions - Added new 3000 core with a more efficient API - Added a separate db_gpio_atr core to control the ATR bus - Ported b2xx, e3xx and x3xx to the new core - Minor cleanup --- host/lib/usrp/dboard/db_rfx.cpp | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'host/lib/usrp/dboard/db_rfx.cpp') diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp index 1342c913d..3e7df9a39 100644 --- a/host/lib/usrp/dboard/db_rfx.cpp +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -248,15 +248,15 @@ rfx_xcvr::rfx_xcvr( this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, output_enables); //setup the tx atr (this does not change with antenna) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, _power_up | ANT_RX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, _power_up | ANT_RX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); //setup the rx atr (this does not change with antenna) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); } rfx_xcvr::~rfx_xcvr(void){ @@ -272,14 +272,14 @@ void rfx_xcvr::set_rx_ant(const std::string &ant){ //set the rx atr regs that change with antenna setting if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TXRX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ANT_TXRX ); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TXRX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ANT_TXRX ); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ((ant == "TX/RX")? ANT_TXRX : ANT_RX2)); } @@ -292,12 +292,12 @@ void rfx_xcvr::set_tx_ant(const std::string &ant){ //set the tx atr regs that change with antenna setting if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_RX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_RX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX | MIXER_ENB); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); } } -- cgit v1.2.3