From f4f1e5671df49572c77fe5ee0823846709540bb6 Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Tue, 5 May 2015 09:43:50 -0700 Subject: doc: e300: Remove bandwidth promises. Signed-off-by: Moritz Fischer --- host/docs/usrp_e3x0.dox | 1 - 1 file changed, 1 deletion(-) (limited to 'host/docs/usrp_e3x0.dox') diff --git a/host/docs/usrp_e3x0.dox b/host/docs/usrp_e3x0.dox index 2965f4dad..717e864da 100644 --- a/host/docs/usrp_e3x0.dox +++ b/host/docs/usrp_e3x0.dox @@ -21,7 +21,6 @@ - Timed commands in FPGA - Timed sampling in FPGA - 16-bit fixed point sample mode (sc16) - - Up to 10 MHz of RF bandwidth with 16-bit samples \section e3x0_getting_started Getting started -- cgit v1.2.3 From ebc54485b8754756b1deafb15cce366e77f2f039 Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Tue, 5 May 2015 15:39:18 -0700 Subject: doc: e3x0: Added partno. for E310 locking power connector. Signed-off-by: Moritz Fischer --- host/docs/usrp_e3x0.dox | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'host/docs/usrp_e3x0.dox') diff --git a/host/docs/usrp_e3x0.dox b/host/docs/usrp_e3x0.dox index 717e864da..a14553734 100644 --- a/host/docs/usrp_e3x0.dox +++ b/host/docs/usrp_e3x0.dox @@ -276,7 +276,7 @@ You may need to change the USRP's IP address for several reasons: \image html e3x0_rp_overlay.png "USRP E310 Rear Panel" -- **PWR**: Locking connector for the USRP-E Series power supply +- **PWR**: Locking connector (Kycon KLDHCX-0202-A-LT) for the USRP-E Series power supply - **1G ETH**: RJ45 port for Ethernet interfaces - **USB**: USB 2.0 Port - **SERIAL**: Micro USB connection for serial uart console -- cgit v1.2.3