From ae426043df93c4c0255ae05419953645214ff198 Mon Sep 17 00:00:00 2001 From: Martin Braun Date: Wed, 15 Apr 2020 15:08:50 -0700 Subject: b200: Enable power calibration API This lets the B200 transmit and/or receive at given reference power levels. Requirement is that the devices have been separately calibrated with an external calibration device. --- host/docs/usrp_b200.dox | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'host/docs/usrp_b200.dox') diff --git a/host/docs/usrp_b200.dox b/host/docs/usrp_b200.dox index 84939f73e..95e9d4846 100644 --- a/host/docs/usrp_b200.dox +++ b/host/docs/usrp_b200.dox @@ -141,6 +141,15 @@ The property to control the analog RX bandwidth is `bandwidth/value`. UHD will not allow you to set bandwidths larger than your current master clock rate. +\subsection b200_fe_power Power API + +The B200 series support the UHD power calibration API (see: \ref page_power). +The TX path and the two RX paths have their own calibration data, resulting in +6 sets of calibration data total for the B210, and 3 for all the others. + +Devices have to be manually calibrated using a calibrated power meter or +signal generator. + \section b200_hw_ref Hardware Reference \subsection b200_hw_ref_leds LED Indicators -- cgit v1.2.3