From e43b47d65891d30ac5888635a1e3cec3f5046464 Mon Sep 17 00:00:00 2001
From: Josh Blum <josh@joshknows.com>
Date: Wed, 16 Feb 2011 13:40:43 -0800
Subject: uhd: work on identification docs, moved duplicated notes in general

---
 host/docs/general.rst | 49 -------------------------------------------------
 1 file changed, 49 deletions(-)

(limited to 'host/docs/general.rst')

diff --git a/host/docs/general.rst b/host/docs/general.rst
index 90a880c2e..50ef24d6c 100644
--- a/host/docs/general.rst
+++ b/host/docs/general.rst
@@ -4,55 +4,6 @@ UHD - General Application Notes
 
 .. contents:: Table of Contents
 
-------------------------------------------------------------------------
-Finding devices
-------------------------------------------------------------------------
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Device addressing
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Deviced are addressed through key/value string pairs.
-These string pairs can be used to narrow down the search for a specific device or group of devices.
-Most UHD utility applications and examples have a --args parameter that takes a device address;
-where the device address is expressed as a delimited string.
-
-* See the documentation in types/device_addr.hpp for reference.
-* See device-specific application notes for usage.
-
-**Example:**
-::
-
-    serial=0x1234, type=usrpx
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Device discovery
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Devices attached to your system can be discovered using the "uhd_find_devices" program.
-The find devices program scans your system for supported devices and prints
-out an enumerated list of discovered devices and their addresses.
-The list of discovered devices can be narrowed down by specifying device address args.
-
-**Usage:**
-::
-
-    uhd_find_devices
-
-    -- OR --
-
-    uhd_find_devices --args <device-specific-address-args>
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Device properties
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Properties of devices attached to your system can be probed with the "uhd_usrp_probe" program.
-The usrp probe program constructs an instance of the device and prints out its properties;
-properties such as detected daughter-boards, frequency range, gain ranges, etc...
-
-**Usage:**
-::
-
-    uhd_usrp_probe --args <device-specific-address-args>
-
 ------------------------------------------------------------------------
 Misc notes
 ------------------------------------------------------------------------
-- 
cgit v1.2.3