From d94140a4129d6b2153b15860eeb2406672ebb414 Mon Sep 17 00:00:00 2001 From: Martin Braun Date: Fri, 7 Jun 2019 10:17:49 -0700 Subject: uhd: Remove support for N230 Note: N230 is still supported on the 3.15 LTS branch --- host/docs/configuration.dox | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'host/docs/configuration.dox') diff --git a/host/docs/configuration.dox b/host/docs/configuration.dox index d37943324..4ebc2cf9e 100644 --- a/host/docs/configuration.dox +++ b/host/docs/configuration.dox @@ -34,7 +34,7 @@ and possible more options. system_ref_rate | Reference Clock Rate in Hz | X3x0 | system_ref_rate=10e6 self_cal_adc_delay | Run ADC transfer delay self-calibration. | X3x0 | self_cal_adc_delay=1 ext_adc_self_test | Run an extended ADC self test (more than the usual) | X3x0 | ext_adc_self_test=1 - recover_mb_eeprom | Disable version checks. Can damage hardware. Only recommended for recovering devices with corrupted EEPROMs. | X3x0, N230 | recover_mb_eeprom=1 + recover_mb_eeprom | Disable version checks. Can damage hardware. Only recommended for recovering devices with corrupted EEPROMs. | X3x0 | recover_mb_eeprom=1 skip_dram | Ignore DRAM FIFO block. Connect TX streamers straight into DUC or radio. | X3x0, N3xx | skip_dram=1 skip_ddc | Ignore DDC block. Connect Rx streamers straight into radio. | X3x0, N3xx, E3xx | skip_ddc=1 skip_duc | Ignore DUC block. Connect Rx streamers or DRAM straight into radio. | X3x0, N3xx, E3xx | skip_duc=1 -- cgit v1.2.3