From bafa9d95453387814ef25e6b6256ba8db2df612f Mon Sep 17 00:00:00 2001 From: Martin Braun Date: Thu, 23 Jan 2020 16:10:22 -0800 Subject: Merge FPGA repository back into UHD repository MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The FPGA codebase was removed from the UHD repository in 2014 to reduce the size of the repository. However, over the last half-decade, the split between the repositories has proven more burdensome than it has been helpful. By merging the FPGA code back, it will be possible to create atomic commits that touch both FPGA and UHD codebases. Continuous integration testing is also simplified by merging the repositories, because it was previously difficult to automatically derive the correct UHD branch when testing a feature branch on the FPGA repository. This commit also updates the license files and paths therein. We are therefore merging the repositories again. Future development for FPGA code will happen in the same repository as the UHD host code and MPM code. == Original Codebase and Rebasing == The original FPGA repository will be hosted for the foreseeable future at its original local location: https://github.com/EttusResearch/fpga/ It can be used for bisecting, reference, and a more detailed history. The final commit from said repository to be merged here is 05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as v4.0.0.0-pre-uhd-merge. If you have changes in the FPGA repository that you want to rebase onto the UHD repository, simply run the following commands: - Create a directory to store patches (this should be an empty directory): mkdir ~/patches - Now make sure that your FPGA codebase is based on the same state as the code that was merged: cd src/fpga # Or wherever your FPGA code is stored git rebase v4.0.0.0-pre-uhd-merge Note: The rebase command may look slightly different depending on what exactly you're trying to rebase. - Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge: git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches Note: Make sure that only patches are stored in your output directory. It should otherwise be empty. Make sure that you picked the correct range of commits, and only commits you wanted to rebase were exported as patch files. - Go to the UHD repository and apply the patches: cd src/uhd # Or wherever your UHD repository is stored git am --directory fpga ~/patches/* rm -rf ~/patches # This is for cleanup == Contributors == The following people have contributed mainly to these files (this list is not complete): Co-authored-by: Alex Williams Co-authored-by: Andrej Rode Co-authored-by: Ashish Chaudhari Co-authored-by: Ben Hilburn Co-authored-by: Ciro Nishiguchi Co-authored-by: Daniel Jepson Co-authored-by: Derek Kozel Co-authored-by: EJ Kreinar Co-authored-by: Humberto Jimenez Co-authored-by: Ian Buckley Co-authored-by: Jörg Hofrichter Co-authored-by: Jon Kiser Co-authored-by: Josh Blum Co-authored-by: Jonathon Pendlum Co-authored-by: Martin Braun Co-authored-by: Matt Ettus Co-authored-by: Michael West Co-authored-by: Moritz Fischer Co-authored-by: Nick Foster Co-authored-by: Nicolas Cuervo Co-authored-by: Paul Butler Co-authored-by: Paul David Co-authored-by: Ryan Marlow Co-authored-by: Sugandha Gupta Co-authored-by: Sylvain Munaut Co-authored-by: Trung Tran Co-authored-by: Vidush Vishwanath Co-authored-by: Wade Fife --- fpga/usrp1/common/fpga_regs_common.v | 117 +++++++++++++++++++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 fpga/usrp1/common/fpga_regs_common.v (limited to 'fpga/usrp1/common/fpga_regs_common.v') diff --git a/fpga/usrp1/common/fpga_regs_common.v b/fpga/usrp1/common/fpga_regs_common.v new file mode 100644 index 000000000..8035d8565 --- /dev/null +++ b/fpga/usrp1/common/fpga_regs_common.v @@ -0,0 +1,117 @@ +// +// This file is machine generated from ./fpga_regs_common.h +// Do not edit by hand; your edits will be overwritten. +// + +// This file defines registers common to all FPGA configurations. +// Registers 0 to 31 are reserved for use in this file. + + +// The FPGA needs to know the rate that samples are coming from and +// going to the A/D's and D/A's. div = 128e6 / sample_rate + +`define FR_TX_SAMPLE_RATE_DIV 7'd0 +`define FR_RX_SAMPLE_RATE_DIV 7'd1 + +// 2 and 3 are defined in the ATR section + +`define FR_MASTER_CTRL 7'd4 // master enable and reset controls + +// i/o direction registers for pins that go to daughterboards. +// Setting the bit makes it an output from the FPGA to the d'board. +// top 16 is mask, low 16 is value + +`define FR_OE_0 7'd5 // slot 0 +`define FR_OE_1 7'd6 +`define FR_OE_2 7'd7 +`define FR_OE_3 7'd8 + +// i/o registers for pins that go to daughterboards. +// top 16 is a mask, low 16 is value + +`define FR_IO_0 7'd9 // slot 0 +`define FR_IO_1 7'd10 +`define FR_IO_2 7'd11 +`define FR_IO_3 7'd12 + +`define FR_MODE 7'd13 + + +// If the corresponding bit is set, internal FPGA debug circuitry +// controls the i/o pins for the associated bank of daughterboard +// i/o pins. Typically used for debugging FPGA designs. + +`define FR_DEBUG_EN 7'd14 + + +// If the corresponding bit is set, enable the automatic DC +// offset correction control loop. +// +// The 4 low bits are significant: +// +// ADC0 = (1 << 0) +// ADC1 = (1 << 1) +// ADC2 = (1 << 2) +// ADC3 = (1 << 3) +// +// This control loop works if the attached daugherboard blocks DC. +// Currently all daughterboards do block DC. This includes: +// basic rx, dbs_rx, tv_rx, flex_xxx_rx. + +`define FR_DC_OFFSET_CL_EN 7'd15 // DC Offset Control Loop Enable + + +// offset corrections for ADC's and DAC's (2's complement) + +`define FR_ADC_OFFSET_0 7'd16 +`define FR_ADC_OFFSET_1 7'd17 +`define FR_ADC_OFFSET_2 7'd18 +`define FR_ADC_OFFSET_3 7'd19 + + +// ------------------------------------------------------------------------ +// Automatic Transmit/Receive switching +// +// If automatic transmit/receive (ATR) switching is enabled in the +// FR_ATR_CTL register, the presence or absence of data in the FPGA +// transmit fifo selects between two sets of values for each of the 4 +// banks of daughterboard i/o pins. +// +// Each daughterboard slot has 3 16-bit registers associated with it: +// FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_* +// +// FR_ATR_MASK_{0,1,2,3}: +// +// These registers determine which of the daugherboard i/o pins are +// affected by ATR switching. If a bit in the mask is set, the +// corresponding i/o bit is controlled by ATR, else it's output +// value comes from the normal i/o pin output register: +// FR_IO_{0,1,2,3}. +// +// FR_ATR_TXVAL_{0,1,2,3}: +// FR_ATR_RXVAL_{0,1,2,3}: +// +// If the Tx fifo contains data, then the bits from TXVAL that are +// selected by MASK are output. Otherwise, the bits from RXVAL that +// are selected by MASK are output. + +`define FR_ATR_MASK_0 7'd20 // slot 0 +`define FR_ATR_TXVAL_0 7'd21 +`define FR_ATR_RXVAL_0 7'd22 + +`define FR_ATR_MASK_1 7'd23 // slot 1 +`define FR_ATR_TXVAL_1 7'd24 +`define FR_ATR_RXVAL_1 7'd25 + +`define FR_ATR_MASK_2 7'd26 // slot 2 +`define FR_ATR_TXVAL_2 7'd27 +`define FR_ATR_RXVAL_2 7'd28 + +`define FR_ATR_MASK_3 7'd29 // slot 3 +`define FR_ATR_TXVAL_3 7'd30 +`define FR_ATR_RXVAL_3 7'd31 + +// Clock ticks to delay rising and falling edge of T/R signal +`define FR_ATR_TX_DELAY 7'd2 +`define FR_ATR_RX_DELAY 7'd3 + -- cgit v1.2.3