diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/docs/usrp_n3xx.dox | 43 |
1 files changed, 22 insertions, 21 deletions
diff --git a/host/docs/usrp_n3xx.dox b/host/docs/usrp_n3xx.dox index 23f2ceff9..e284de012 100644 --- a/host/docs/usrp_n3xx.dox +++ b/host/docs/usrp_n3xx.dox @@ -361,27 +361,28 @@ For a list of which arguments can be passed into make(), see Section \subsection n3xx_usage_device_args Device arguments - Key | Description | Supported Devices | Example Value ----------------------|------------------------------------------------------------------------------|-------------------|--------------------- - addr | IPv4 address of primary SFP+ port to connect to. | All N3xx | addr=192.168.30.2 - second_addr | IPv4 address of secondary SFP+ port to connect to. | All N3xx | second_addr=192.168.40.2 - mgmt_addr | IPv4 address or hostname which to connect the RPC client. Defaults to `addr'.| All N3xx | mgmt_addr=ni-sulfur-311FE00 (can also go to RJ45) - find_all | When using broadcast, find all devices, even if unreachable via CHDR. | All N3xx | find_all=1 - master_clock_rate | Master Clock Rate in Hz | N310 | master_clock_rate=125e6 - identify | Causes front-panel LEDs to blink. The duration is variable. | N310 | identify=5 (will blink for about 5 seconds) - serialize_init | Force serial initialization of daughterboards. | All N3xx | serialize_init=1 - skip_dram | Ignore DRAM FIFO block. Connect TX streamers straight into DUC or radio. | All N3xx | skip_dram=1 - skip_ddc | Ignore DDC block. Connect Rx streamers straight into radio. | All N3xx | skip_ddc=1 - skip_duc | Ignore DUC block. Connect Rx streamers or DRAM straight into radio. | All N3xx | skip_duc=1 - skip_init | Skip the initialization process for the device. | All N3xx | skip_init=1 - ref_clk_freq | Specify the external reference clock frequency, default is 10 MHz. | N310 | ref_clk_freq=20e6 - init_cals | Specify the bitmask for initial calibrations of the RFIC. | N310 | init_cals=BASIC - init_cals_timeout | Timeout for initial calibrations in milliseconds. | N310 | init_cals_timeout=45000 - discovery_port | Override default value for MPM discovery port. | All N3xx | discovery_port=49700 - rpc_port | Override default value for MPM RPC port. | All N3xx | rpc_port=49701 - tracking_cals | Specify the bitmask for tracking calibrations of the RFIC. | N310 | tracking_cals=ALL - rx_lo_source | Initialize the source for the RX LO. | N310 | rx_lo_source=external - tx_lo_source | Initialize the source for the TX LO. | N310 | tx_lo_source=external + Key | Description | Supported Devices | Example Value +-----------------------|------------------------------------------------------------------------------|-------------------|--------------------- + addr | IPv4 address of primary SFP+ port to connect to. | All N3xx | addr=192.168.30.2 + second_addr | IPv4 address of secondary SFP+ port to connect to. | All N3xx | second_addr=192.168.40.2 + mgmt_addr | IPv4 address or hostname which to connect the RPC client. Defaults to `addr'.| All N3xx | mgmt_addr=ni-sulfur-311FE00 (can also go to RJ45) + find_all | When using broadcast, find all devices, even if unreachable via CHDR. | All N3xx | find_all=1 + master_clock_rate | Master Clock Rate in Hz | N310 | master_clock_rate=125e6 + identify | Causes front-panel LEDs to blink. The duration is variable. | N310 | identify=5 (will blink for about 5 seconds) + serialize_init | Force serial initialization of daughterboards. | All N3xx | serialize_init=1 + skip_dram | Ignore DRAM FIFO block. Connect TX streamers straight into DUC or radio. | All N3xx | skip_dram=1 + skip_ddc | Ignore DDC block. Connect Rx streamers straight into radio. | All N3xx | skip_ddc=1 + skip_duc | Ignore DUC block. Connect Rx streamers or DRAM straight into radio. | All N3xx | skip_duc=1 + skip_init | Skip the initialization process for the device. | All N3xx | skip_init=1 + ref_clk_freq | Specify the external reference clock frequency, default is 10 MHz. | N310 | ref_clk_freq=20e6 + init_cals | Specify the bitmask for initial calibrations of the RFIC. | N310 | init_cals=BASIC + init_cals_timeout | Timeout for initial calibrations in milliseconds. | N310 | init_cals_timeout=45000 + discovery_port | Override default value for MPM discovery port. | All N3xx | discovery_port=49700 + rpc_port | Override default value for MPM RPC port. | All N3xx | rpc_port=49701 + tracking_cals | Specify the bitmask for tracking calibrations of the RFIC. | N310 | tracking_cals=ALL + rx_lo_source | Initialize the source for the RX LO. | N310 | rx_lo_source=external + tx_lo_source | Initialize the source for the TX LO. | N310 | tx_lo_source=external + rfic_digital_loopback | Digital data loopback inside the RFIC. | N310 | rfic_digital_loopback=1 \subsection n3xx_usage_sensors The sensor API |