diff options
Diffstat (limited to 'host/lib/usrp')
| -rw-r--r-- | host/lib/usrp/x300/x300_eth_mgr.cpp | 36 |
1 files changed, 20 insertions, 16 deletions
diff --git a/host/lib/usrp/x300/x300_eth_mgr.cpp b/host/lib/usrp/x300/x300_eth_mgr.cpp index 02f9abe0f..5153af671 100644 --- a/host/lib/usrp/x300/x300_eth_mgr.cpp +++ b/host/lib/usrp/x300/x300_eth_mgr.cpp @@ -52,14 +52,18 @@ constexpr size_t XGE_DATA_FRAME_RECV_SIZE = 8000; constexpr size_t GE_DATA_FRAME_SEND_SIZE = 1472; constexpr size_t GE_DATA_FRAME_RECV_SIZE = 1472; constexpr size_t ETH_MSG_NUM_FRAMES = 64; -constexpr size_t ETH_DATA_NUM_FRAMES = 32; -constexpr size_t ETH_MSG_FRAME_SIZE = uhd::transport::udp_simple::mtu; // bytes -constexpr size_t MAX_RATE_10GIGE = (size_t)( // bytes/s + +// Default for num data frames is set to a value that will work well when send +// or recv offload is enabled, or when using DPDK. +constexpr size_t ETH_DATA_NUM_FRAMES = 32; + +constexpr size_t ETH_MSG_FRAME_SIZE = uhd::transport::udp_simple::mtu; // bytes +constexpr size_t MAX_RATE_10GIGE = (size_t)( // bytes/s 10e9 / 8 * // wire speed multiplied by percentage of packets that is sample data (float(x300::DATA_FRAME_MAX_SIZE - CHDR_MAX_LEN_HDR) / float(x300::DATA_FRAME_MAX_SIZE + 8 /* UDP header */ + 20 /* Ethernet header length */))); -constexpr size_t MAX_RATE_1GIGE = (size_t)( // bytes/s +constexpr size_t MAX_RATE_1GIGE = (size_t)( // bytes/s 10e9 / 8 * // wire speed multiplied by percentage of packets that is sample data (float(GE_DATA_FRAME_RECV_SIZE - CHDR_MAX_LEN_HDR) / float(GE_DATA_FRAME_RECV_SIZE @@ -196,7 +200,7 @@ eth_manager::eth_manager( // Once we read the EEPROM, we use it to map IP to its interface // In discover_eth(), we'll check and enable the other IP address, if given x300_eth_conn_t init; - init.addr = args.get_first_addr(); + init.addr = args.get_first_addr(); auto device_id = allocate_device_id(); _local_device_ids.push_back(device_id); eth_conns[device_id] = init; @@ -237,18 +241,16 @@ both_links_t eth_manager::get_links(link_type_t link_type, // Buffering is done in the socket buffers, so size them relative to // the link rate link_params_t default_link_params; - // There is no need for more than 1 send and recv frame since the - // buffering is done in the socket buffers - default_link_params.num_send_frames = 1; // or 2? - default_link_params.num_recv_frames = 2; + default_link_params.num_send_frames = ETH_DATA_NUM_FRAMES; + default_link_params.num_recv_frames = ETH_DATA_NUM_FRAMES; default_link_params.send_frame_size = conn.link_rate == MAX_RATE_1GIGE ? GE_DATA_FRAME_SEND_SIZE : XGE_DATA_FRAME_SEND_SIZE; default_link_params.recv_frame_size = conn.link_rate == MAX_RATE_1GIGE ? GE_DATA_FRAME_RECV_SIZE : XGE_DATA_FRAME_RECV_SIZE; - default_link_params.send_buff_size = conn.link_rate / 50; - default_link_params.recv_buff_size = std::max(conn.link_rate / 50, + default_link_params.send_buff_size = conn.link_rate / 50; + default_link_params.recv_buff_size = std::max(conn.link_rate / 50, ETH_MSG_NUM_FRAMES * ETH_MSG_FRAME_SIZE); // enough to hold greater of 20 ms or // number of msg frames @@ -260,8 +262,10 @@ both_links_t eth_manager::get_links(link_type_t link_type, link_args); // Enforce a minimum bound of the number of receive and send frames. - link_params.num_send_frames = std::max(uhd::rfnoc::MIN_NUM_FRAMES, link_params.num_send_frames); - link_params.num_recv_frames = std::max(uhd::rfnoc::MIN_NUM_FRAMES, link_params.num_recv_frames); + link_params.num_send_frames = + std::max(uhd::rfnoc::MIN_NUM_FRAMES, link_params.num_send_frames); + link_params.num_recv_frames = + std::max(uhd::rfnoc::MIN_NUM_FRAMES, link_params.num_recv_frames); if (_args.get_use_dpdk()) { #ifdef HAVE_DPDK @@ -338,8 +342,8 @@ void eth_manager::init_link( _max_frame_sizes = pri_frame_sizes; if (_local_device_ids.size() > 1) { - frame_size_t sec_frame_sizes = - determine_max_frame_size(eth_conns.at(_local_device_ids.at(1)).addr, req_max_frame_size); + frame_size_t sec_frame_sizes = determine_max_frame_size( + eth_conns.at(_local_device_ids.at(1)).addr, req_max_frame_size); // Choose the minimum of the max frame sizes // to ensure we don't exceed any one of the links' MTU @@ -382,7 +386,7 @@ void eth_manager::init_link( // Check actual frame sizes against detected frame sizes, and print // warnings if they don't match for (auto conn_pair : eth_conns) { - auto conn = conn_pair.second; + auto conn = conn_pair.second; size_t rec_send_frame_size = conn.link_rate == MAX_RATE_1GIGE ? GE_DATA_FRAME_SEND_SIZE : XGE_DATA_FRAME_SEND_SIZE; |