diff options
Diffstat (limited to 'host/lib/usrp/usrp1')
| -rw-r--r-- | host/lib/usrp/usrp1/codec_ctrl.cpp | 26 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/io_impl.cpp | 12 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/usrp1_calc_mux.hpp | 2 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/usrp1_iface.cpp | 20 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/usrp1_impl.cpp | 28 | 
5 files changed, 44 insertions, 44 deletions
diff --git a/host/lib/usrp/usrp1/codec_ctrl.cpp b/host/lib/usrp/usrp1/codec_ctrl.cpp index 4c811d5e2..73b97aa13 100644 --- a/host/lib/usrp/usrp1/codec_ctrl.cpp +++ b/host/lib/usrp/usrp1/codec_ctrl.cpp @@ -277,9 +277,9 @@ void usrp1_codec_ctrl_impl::send_reg(uint8_t addr)  {      uint32_t reg = _ad9862_regs.get_write_reg(addr); -    UHD_LOGV(often) +    UHD_LOGGER_DEBUG("USRP1")          << "codec control write reg: 0x" -        << std::setw(8) << std::hex << reg << std::endl +        << std::setw(8) << std::hex << reg       ;      _iface->write_spi(_spi_slave,                           spi_config_t::EDGE_RISE, reg, 16); @@ -289,17 +289,17 @@ void usrp1_codec_ctrl_impl::recv_reg(uint8_t addr)  {      uint32_t reg = _ad9862_regs.get_read_reg(addr); -    UHD_LOGV(often) +    UHD_LOGGER_DEBUG("USRP1")          << "codec control read reg: 0x" -        << std::setw(8) << std::hex << reg << std::endl +        << std::setw(8) << std::hex << reg       ;      uint32_t ret = _iface->read_spi(_spi_slave,                                          spi_config_t::EDGE_RISE, reg, 16); -    UHD_LOGV(often) +    UHD_LOGGER_DEBUG("USRP1")          << "codec control read ret: 0x" -        << std::setw(8) << std::hex << ret << std::endl +        << std::setw(8) << std::hex << ret       ;      _ad9862_regs.set_reg(addr, uint16_t(ret)); @@ -389,13 +389,13 @@ void usrp1_codec_ctrl_impl::set_duc_freq(double freq, double rate)      double coarse_freq = coarse_tune(codec_rate, freq);      double fine_freq = fine_tune(codec_rate / 4, freq - coarse_freq); -    UHD_LOG -        << "ad9862 tuning result:" << std::endl -        << "   requested:   " << freq << std::endl -        << "   actual:      " << coarse_freq + fine_freq << std::endl -        << "   coarse freq: " << coarse_freq << std::endl -        << "   fine freq:   " << fine_freq << std::endl -        << "   codec rate:  " << codec_rate << std::endl +    UHD_LOGGER_DEBUG("USRP1") +        << "ad9862 tuning result:"  +        << "   requested:   " << freq  +        << "   actual:      " << coarse_freq + fine_freq  +        << "   coarse freq: " << coarse_freq  +        << "   fine freq:   " << fine_freq  +        << "   codec rate:  " << codec_rate       ;      this->send_reg(20); diff --git a/host/lib/usrp/usrp1/io_impl.cpp b/host/lib/usrp/usrp1/io_impl.cpp index 3e0b23973..7ed1d8671 100644 --- a/host/lib/usrp/usrp1/io_impl.cpp +++ b/host/lib/usrp/usrp1/io_impl.cpp @@ -22,7 +22,7 @@  #include "../../transport/super_send_packet_handler.hpp"  #include "usrp1_calc_mux.hpp"  #include "usrp1_impl.hpp" -#include <uhd/utils/msg.hpp> +#include <uhd/utils/log.hpp>  #include <uhd/utils/tasks.hpp>  #include <uhd/utils/safe_call.hpp>  #include <uhd/transport/bounded_buffer.hpp> @@ -305,19 +305,19 @@ void usrp1_impl::vandal_conquest_loop(void){          if (_tx_enabled and underflow){              async_metadata.time_spec = _soft_time_ctrl->get_time();              _soft_time_ctrl->get_async_queue().push_with_pop_on_full(async_metadata); -            UHD_MSG(fastpath) << "U"; +            UHD_LOG_FASTPATH("U")          }          if (_rx_enabled and overflow){              inline_metadata.time_spec = _soft_time_ctrl->get_time();              _soft_time_ctrl->get_inline_queue().push_with_pop_on_full(inline_metadata); -            UHD_MSG(fastpath) << "O"; +            UHD_LOG_FASTPATH("O")          }          boost::this_thread::sleep(boost::posix_time::milliseconds(50));      }}      catch(const boost::thread_interrupted &){} //normal exit condition      catch(const std::exception &e){ -        UHD_MSG(error) << "The vandal caught an unexpected exception " << e.what() << std::endl; +        UHD_LOGGER_ERROR("USRP1") << "The vandal caught an unexpected exception " << e.what() ;      }  } @@ -500,11 +500,11 @@ double usrp1_impl::update_rx_samp_rate(size_t dspno, const double samp_rate){      const size_t div = this->has_rx_halfband()? 2 : 1;      const size_t rate = boost::math::iround(_master_clock_rate/this->get_rx_dsp_host_rates().clip(samp_rate, true)); -    if (rate < 8 and this->has_rx_halfband()) UHD_MSG(warning) << +    if (rate < 8 and this->has_rx_halfband()) UHD_LOGGER_WARNING("USRP1") <<          "USRP1 cannot achieve decimations below 8 when the half-band filter is present.\n"          "The usrp1_fpga_4rx.rbf file is a special FPGA image without RX half-band filters.\n"          "To load this image, set the device address key/value pair: fpga=usrp1_fpga_4rx.rbf\n" -    << std::endl; +    ;      if (dspno == 0){ //only care if dsp0 is set since its homogeneous          bool s = this->disable_rx(); diff --git a/host/lib/usrp/usrp1/usrp1_calc_mux.hpp b/host/lib/usrp/usrp1/usrp1_calc_mux.hpp index 0ae1c822f..293d9c37c 100644 --- a/host/lib/usrp/usrp1/usrp1_calc_mux.hpp +++ b/host/lib/usrp/usrp1/usrp1_calc_mux.hpp @@ -83,7 +83,7 @@ static uint32_t calc_rx_mux(const std::vector<mapping_pair_t> &mapping){      //    for all quadrature sources: Z = 0      //    for mixed sources: warning + Z = 0      int Z = (num_quads > 0)? 0 : 1; -    if (num_quads != 0 and num_reals != 0) UHD_MSG(warning) << boost::format( +    if (num_quads != 0 and num_reals != 0) UHD_LOGGER_WARNING("USRP1") << boost::format(          "Mixing real and quadrature rx subdevices is not supported.\n"          "The Q input to the real source(s) will be non-zero.\n"      ); diff --git a/host/lib/usrp/usrp1/usrp1_iface.cpp b/host/lib/usrp/usrp1/usrp1_iface.cpp index b65f8fa2f..2d28ad542 100644 --- a/host/lib/usrp/usrp1/usrp1_iface.cpp +++ b/host/lib/usrp/usrp1/usrp1_iface.cpp @@ -49,10 +49,10 @@ public:      {          uint32_t swapped = uhd::htonx(value); -        UHD_LOGV(always) +        UHD_LOGGER_DEBUG("USRP1")              << "poke32("              << std::dec << std::setw(2) << addr << ", 0x" -            << std::hex << std::setw(8) << value << ")" << std::endl +            << std::hex << std::setw(8) << value << ")"          ;          uint8_t w_index_h = SPI_ENABLE_FPGA & 0xff; @@ -70,9 +70,9 @@ public:      uint32_t peek32(const uint32_t addr)      { -        UHD_LOGV(always) +        UHD_LOGGER_DEBUG("USRP1")              << "peek32(" -            << std::dec << std::setw(2) << addr << ")" << std::endl +            << std::dec << std::setw(2) << addr << ")"          ;          uint32_t value_out; @@ -129,12 +129,12 @@ public:                                   size_t num_bits,                                   bool readback)      { -        UHD_LOGV(always) -            << "transact_spi: " << std::endl -            << "  slave: " << which_slave << std::endl -            << "  bits: " << bits << std::endl -            << "  num_bits: " << num_bits << std::endl -            << "  readback: " << readback << std::endl +        UHD_LOGGER_DEBUG("USRP1") +            << "transact_spi: " +            << "  slave: " << which_slave +            << "  bits: " << bits +            << "  num_bits: " << num_bits +            << "  readback: " << readback          ;          UHD_ASSERT_THROW((num_bits <= 32) && !(num_bits % 8));          size_t num_bytes = num_bits / 8; diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp index 8dee9b7e6..7c479a447 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.cpp +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -19,7 +19,7 @@  #include <uhd/utils/log.hpp>  #include <uhd/utils/safe_call.hpp>  #include <uhd/transport/usb_control.hpp> -#include <uhd/utils/msg.hpp> +#include <uhd/utils/log.hpp>  #include <uhd/utils/cast.hpp>  #include <uhd/exception.hpp>  #include <uhd/utils/static.hpp> @@ -83,9 +83,9 @@ static device_addrs_t usrp1_find(const device_addr_t &hint)              usrp1_fw_image = find_image_path(hint.get("fw", "usrp1_fw.ihx"));          }          catch(...){ -            UHD_MSG(warning) << boost::format("Could not locate USRP1 firmware. %s") % print_utility_error("uhd_images_downloader.py"); +            UHD_LOGGER_WARNING("USRP1") << boost::format("Could not locate USRP1 firmware. %s") % print_utility_error("uhd_images_downloader.py");          } -        UHD_LOG << "USRP1 firmware image: " << usrp1_fw_image << std::endl; +        UHD_LOGGER_DEBUG("USRP1") << "USRP1 firmware image: " << usrp1_fw_image ;          usb_control::sptr control;          try{control = usb_control::make(handle, 0);} @@ -144,14 +144,14 @@ UHD_STATIC_BLOCK(register_usrp1_device){   * Structors   **********************************************************************/  usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ -    UHD_MSG(status) << "Opening a USRP1 device..." << std::endl; +    UHD_LOGGER_INFO("USRP1") << "Opening a USRP1 device...";      _type = device::USRP;      //extract the FPGA path for the USRP1      std::string usrp1_fpga_image = find_image_path(          device_addr.get("fpga", "usrp1_fpga.rbf")      ); -    UHD_LOG << "USRP1 FPGA image: " << usrp1_fpga_image << std::endl; +    UHD_LOGGER_DEBUG("USRP1") << "USRP1 FPGA image: " << usrp1_fpga_image ;      //try to match the given device address with something on the USB bus      std::vector<usb_device_handle::sptr> device_list = @@ -190,12 +190,12 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){      _iface->poke32(FR_MODE, 0x00000000);      _iface->poke32(FR_DEBUG_EN, 0x00000000); -    UHD_LOG -        << "USRP1 Capabilities" << std::endl -        << "    number of duc's: " << get_num_ddcs() << std::endl -        << "    number of ddc's: " << get_num_ducs() << std::endl -        << "    rx halfband:     " << has_rx_halfband() << std::endl -        << "    tx halfband:     " << has_tx_halfband() << std::endl +    UHD_LOGGER_DEBUG("USRP1") +        << "USRP1 Capabilities"  +        << "    number of duc's: " << get_num_ddcs()  +        << "    number of ddc's: " << get_num_ducs()  +        << "    rx halfband:     " << has_rx_halfband()  +        << "    tx halfband:     " << has_tx_halfband()       ;      //////////////////////////////////////////////////////////////////// @@ -232,7 +232,7 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){              _master_clock_rate = boost::lexical_cast<double>(device_addr["mcr"]);          }          catch(const std::exception &e){ -            UHD_MSG(error) << "Error parsing FPGA clock rate from device address: " << e.what() << std::endl; +            UHD_LOGGER_ERROR("USRP1") << "Error parsing FPGA clock rate from device address: " << e.what() ;          }      }      else if (not mb_eeprom["mcr"].empty()){ @@ -240,10 +240,10 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){              _master_clock_rate = boost::lexical_cast<double>(mb_eeprom["mcr"]);          }          catch(const std::exception &e){ -            UHD_MSG(error) << "Error parsing FPGA clock rate from EEPROM: " << e.what() << std::endl; +            UHD_LOGGER_ERROR("USRP1") << "Error parsing FPGA clock rate from EEPROM: " << e.what() ;          }      } -    UHD_MSG(status) << boost::format("Using FPGA clock rate of %fMHz...") % (_master_clock_rate/1e6) << std::endl; +    UHD_LOGGER_INFO("USRP1") << boost::format("Using FPGA clock rate of %fMHz...") % (_master_clock_rate/1e6) ;      _tree->create<double>(mb_path / "tick_rate")          .add_coerced_subscriber(boost::bind(&usrp1_impl::update_tick_rate, this, _1))          .set(_master_clock_rate);  | 
