diff options
Diffstat (limited to 'host/include')
| -rw-r--r-- | host/include/uhd/usrp/dboard_iface.hpp | 58 |
1 files changed, 20 insertions, 38 deletions
diff --git a/host/include/uhd/usrp/dboard_iface.hpp b/host/include/uhd/usrp/dboard_iface.hpp index c3a3a4e00..4a80908e0 100644 --- a/host/include/uhd/usrp/dboard_iface.hpp +++ b/host/include/uhd/usrp/dboard_iface.hpp @@ -64,8 +64,9 @@ public: //! tells the host which unit to use enum unit_t{ - UNIT_RX = int('r'), - UNIT_TX = int('t') + UNIT_RX = int('r'), + UNIT_TX = int('t'), + UNIT_BOTH = int('b'), }; //! aux dac selection enums (per unit) @@ -84,6 +85,8 @@ public: typedef uhd::usrp::gpio_atr::gpio_atr_reg_t atr_reg_t; + virtual ~dboard_iface(void) {}; + /*! * Get special properties information for this dboard slot. * This call helps the dboard code to handle implementation @@ -118,8 +121,8 @@ public: * \param mask 16-bits, 0=do not change, 1=change value */ virtual void set_pin_ctrl( - unit_t unit, boost::uint16_t value, boost::uint16_t mask = 0xffff - ); + unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffff + ) = 0; /*! * Read back the pin control setting. @@ -127,7 +130,7 @@ public: * \param unit which unit rx or tx * \return the 16-bit settings value */ - virtual boost::uint16_t get_pin_ctrl(unit_t unit); + virtual boost::uint32_t get_pin_ctrl(unit_t unit) = 0; /*! * Set a daughterboard ATR register. @@ -138,8 +141,8 @@ public: * \param mask 16-bits, 0=do not change, 1=change value */ virtual void set_atr_reg( - unit_t unit, atr_reg_t reg, boost::uint16_t value, boost::uint16_t mask = 0xffff - ); + unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask = 0xffff + ) = 0; /*! * Read back an ATR register setting. @@ -148,7 +151,7 @@ public: * \param reg which ATR register * \return the 16-bit settings value */ - virtual boost::uint16_t get_atr_reg(unit_t unit, atr_reg_t reg); + virtual boost::uint32_t get_atr_reg(unit_t unit, atr_reg_t reg) = 0; /*! * Set daughterboard GPIO data direction setting. @@ -158,8 +161,8 @@ public: * \param mask 16-bits, 0=do not change, 1=change value */ virtual void set_gpio_ddr( - unit_t unit, boost::uint16_t value, boost::uint16_t mask = 0xffff - ); + unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffff + ) = 0; /*! * Read back the GPIO data direction setting. @@ -167,7 +170,7 @@ public: * \param unit which unit rx or tx * \return the 16-bit settings value */ - virtual boost::uint16_t get_gpio_ddr(unit_t unit); + virtual boost::uint32_t get_gpio_ddr(unit_t unit) = 0; /*! * Set daughterboard GPIO pin output setting. @@ -177,8 +180,8 @@ public: * \param mask 16-bits, 0=do not change, 1=change value */ virtual void set_gpio_out( - unit_t unit, boost::uint16_t value, boost::uint16_t mask = 0xffff - ); + unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffff + ) = 0; /*! * Read back the GPIO pin output setting. @@ -186,15 +189,7 @@ public: * \param unit which unit rx or tx * \return the 16-bit settings value */ - virtual boost::uint16_t get_gpio_out(unit_t unit); - - /*! - * Setup the GPIO debug mux. - * - * \param unit which unit rx or tx - * \param which which debug: 0, 1 - */ - virtual void set_gpio_debug(unit_t unit, int which) = 0; + virtual boost::uint32_t get_gpio_out(unit_t unit) = 0; /*! * Read daughterboard GPIO pin values. @@ -202,7 +197,7 @@ public: * \param unit which unit rx or tx * \return the value of the gpio unit */ - virtual boost::uint16_t read_gpio(unit_t unit) = 0; + virtual boost::uint32_t read_gpio(unit_t unit) = 0; /*! * Write data to SPI bus peripheral. @@ -280,26 +275,13 @@ public: * Get the command time. * \return the command time */ - virtual uhd::time_spec_t get_command_time(void); + virtual uhd::time_spec_t get_command_time(void) = 0; /*! * Set the command time. * \param t the time */ - virtual void set_command_time(const uhd::time_spec_t& t); - -private: - UHD_PIMPL_DECL(impl) _impl; - - virtual void _set_pin_ctrl(unit_t unit, boost::uint16_t value) = 0; - virtual void _set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint16_t value) = 0; - virtual void _set_gpio_ddr(unit_t unit, boost::uint16_t value) = 0; - virtual void _set_gpio_out(unit_t unit, boost::uint16_t value) = 0; - -protected: - dboard_iface(void); -public: - virtual ~dboard_iface(void); + virtual void set_command_time(const uhd::time_spec_t& t) = 0; }; |