diff options
Diffstat (limited to 'host/docs/usrp_e1x0.rst')
| -rw-r--r-- | host/docs/usrp_e1x0.rst | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/host/docs/usrp_e1x0.rst b/host/docs/usrp_e1x0.rst index 189cbb86b..fc929e639 100644 --- a/host/docs/usrp_e1x0.rst +++ b/host/docs/usrp_e1x0.rst @@ -22,7 +22,7 @@ Comparative features list ------------------------------------------------------------------------ Specify a Non-standard Image ------------------------------------------------------------------------ -UHD will automatically select the USRP-Embedded FPGA image from the +UHD software will automatically select the USRP-Embedded FPGA image from the installed images package. The FPGA image selection can be overridden with the **--fpga=** device address parameter. @@ -53,7 +53,7 @@ on the device. * **J16** is a two pin header; remove the jumper (or leave it on pin1 only). * **J15** is a three pin header; move the jumper to (pin1, pin2). -**Note:** See instructions below to communicate the desired clock rate UHD. +**Note:** See instructions below to communicate the desired clock rate to UHD software. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Set other rates - uses internal VCO @@ -63,7 +63,7 @@ To use other clock rates, the jumpers will need to be in the default position. * **J16** is a two pin header; move the jumper to (pin1, pin2). * **J15** is a three pin header; move the jumper to (pin2, pin3). -To communicate the desired clock rate into UHD, +To communicate the desired clock rate into UHD software, specify the a special device address argument, where the key is **master_clock_rate** and the value is a rate in Hz. Example: @@ -103,7 +103,7 @@ a connector. Test the PPS input with the following app: -* **<args** are device address arguments (optional if only one USRP is on your machine). +* **<args** are device address arguments (optional if only one USRP device is on your machine). :: @@ -116,7 +116,7 @@ Internal GPSDO Please see the `Internal GPSDO Application Notes <./gpsdo.html>`_ for information on configuring and using the internal GPSDO. -UHD will always try to detect an installed GPSDO at runtime. +UHD software will always try to detect an installed GPSDO at runtime. There is not a special EEPROM value to burn for GPSDO detection. ------------------------------------------------------------------------ |