diff options
Diffstat (limited to 'firmware')
| -rw-r--r-- | firmware/zpu/apps/txrx_uhd.c | 44 | ||||
| -rw-r--r-- | firmware/zpu/lib/ad9510.c | 6 | ||||
| -rw-r--r-- | firmware/zpu/lib/clocks.c | 5 | ||||
| -rw-r--r-- | firmware/zpu/lib/eth_addrs.c | 132 | ||||
| -rw-r--r-- | firmware/zpu/lib/ethernet.h | 21 | ||||
| -rw-r--r-- | firmware/zpu/lib/memory_map.h | 37 | ||||
| -rw-r--r-- | firmware/zpu/lib/net_common.c | 28 | ||||
| -rw-r--r-- | firmware/zpu/lib/net_common.h | 5 | ||||
| -rw-r--r-- | firmware/zpu/lib/spi.c | 97 | ||||
| -rw-r--r-- | firmware/zpu/lib/spi.h | 42 | ||||
| -rw-r--r-- | firmware/zpu/lib/u2_init.c | 2 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/spi_flash.c | 4 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/spi_flash.h | 10 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/spif.c | 1 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/u2p_init.c | 3 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/udp_fw_update.c | 4 |
16 files changed, 202 insertions, 239 deletions
diff --git a/firmware/zpu/apps/txrx_uhd.c b/firmware/zpu/apps/txrx_uhd.c index 9daf441e2..0142aa3d4 100644 --- a/firmware/zpu/apps/txrx_uhd.c +++ b/firmware/zpu/apps/txrx_uhd.c @@ -89,11 +89,42 @@ static void handle_udp_data_packet( which = 1; break; + case USRP2_UDP_FIFO_CRTL_PORT: + which = 3; + break; + default: return; } - eth_mac_addr_t eth_mac_host; arp_cache_lookup_mac(&src.addr, ð_mac_host); - setup_framer(eth_mac_host, *ethernet_mac_addr(), src, dst, which); + //assume the packet destination is the packet source + //the arp cache lookup should never fail for this case + const struct socket_address src_addr = dst; + struct socket_address dst_addr = src; + eth_mac_addr_t eth_mac_dst; + arp_cache_lookup_mac(&dst_addr.addr, ð_mac_dst); + + //however, if this control packet has an alternative destination... + if (payload_len >= sizeof(usrp2_stream_ctrl_t)){ + + //parse the destination ip addr and udp port from the payload + const usrp2_stream_ctrl_t *stream_ctrl = (const usrp2_stream_ctrl_t *)payload; + dst_addr.addr.addr = stream_ctrl->ip_addr; + dst_addr.port = (uint16_t)stream_ctrl->udp_port; + struct ip_addr ip_dest = dst_addr.addr; + + //are we in the subnet? if not use the gateway + const uint32_t subnet_mask = get_subnet()->addr; + const bool in_subnet = ((get_ip_addr()->addr & subnet_mask) == (ip_dest.addr & subnet_mask)); + if (!in_subnet) ip_dest = *get_gateway(); + + //lookup the host ip address with ARP (this may fail) + const bool ok = arp_cache_lookup_mac(&ip_dest, ð_mac_dst); + if (!ok) net_common_send_arp_request(&ip_dest); + const uint32_t result = (ok)? 0 : ~0; + send_udp_pkt(dst.port, src, &result, sizeof(result)); + } + + setup_framer(eth_mac_dst, *ethernet_mac_addr(), dst_addr, src_addr, which); } #define OTW_GPIO_BANK_TO_NUM(bank) \ @@ -150,8 +181,8 @@ static void handle_udp_ctrl_packet( ctrl_data_in->data.spi_args.dev, //which device ctrl_data_in->data.spi_args.data, //32 bit data ctrl_data_in->data.spi_args.num_bits, //length in bits - (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPIF_PUSH_FALL : SPIF_PUSH_RISE | - (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPIF_LATCH_RISE : SPIF_LATCH_FALL + (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPI_PUSH_FALL : SPI_PUSH_RISE | + (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPI_LATCH_RISE : SPI_LATCH_FALL ); //load output @@ -279,6 +310,7 @@ int main(void) { u2_init(); + arp_cache_init(); #ifdef BOOTLOADER putstr("\nUSRP N210 UDP bootloader\n"); #else @@ -294,8 +326,7 @@ main(void) //load the production FPGA image or firmware if appropriate do_the_bootload_thing(); //if we get here we've fallen through to safe firmware - set_default_mac_addr(); - set_default_ip_addr(); + eth_addrs_set_default(); #endif print_mac_addr(ethernet_mac_addr()); newline(); @@ -311,6 +342,7 @@ main(void) register_udp_listener(USRP2_UDP_RX_DSP0_PORT, handle_udp_data_packet); register_udp_listener(USRP2_UDP_RX_DSP1_PORT, handle_udp_data_packet); register_udp_listener(USRP2_UDP_TX_DSP0_PORT, handle_udp_data_packet); + register_udp_listener(USRP2_UDP_FIFO_CRTL_PORT, handle_udp_data_packet); #ifdef USRP2P register_udp_listener(USRP2_UDP_UPDATE_PORT, handle_udp_fw_update_packet); diff --git a/firmware/zpu/lib/ad9510.c b/firmware/zpu/lib/ad9510.c index 4d3acb65d..4021a9bf7 100644 --- a/firmware/zpu/lib/ad9510.c +++ b/firmware/zpu/lib/ad9510.c @@ -1,5 +1,5 @@ -/* -*- c++ -*- */ /* + * Copyright 2012 Ettus Research LLC * Copyright 2008 Free Software Foundation, Inc. * * This program is free software: you can redistribute it and/or modify @@ -28,7 +28,7 @@ ad9510_write_reg(int regno, uint8_t value) { uint32_t inst = WR | (regno & 0xff); uint32_t v = (inst << 8) | (value & 0xff); - spi_transact(SPI_TXONLY, SPI_SS_AD9510, v, 24, SPIF_PUSH_FALL); + spi_transact(SPI_TXONLY, SPI_SS_AD9510, v, 24, SPI_PUSH_FALL); } int @@ -37,6 +37,6 @@ ad9510_read_reg(int regno) uint32_t inst = RD | (regno & 0xff); uint32_t v = (inst << 8) | 0; uint32_t r = spi_transact(SPI_TXRX, SPI_SS_AD9510, v, 24, - SPIF_PUSH_FALL | SPIF_LATCH_FALL); + SPI_PUSH_FALL | SPI_LATCH_FALL); return r & 0xff; } diff --git a/firmware/zpu/lib/clocks.c b/firmware/zpu/lib/clocks.c index c1e8ce827..bc1954e13 100644 --- a/firmware/zpu/lib/clocks.c +++ b/firmware/zpu/lib/clocks.c @@ -43,7 +43,10 @@ clocks_init(void) //enable the 100MHz clock output to the FPGA for 50MHz CPU clock clocks_enable_fpga_clk(true, 1); - spi_wait(); + //! Cannot SPI wait since SPI is on DSP clock + //! because DSP clock goes away until DCM reset. + //! However, spi is quick, the cpu is slow, its already ready... + //spi_wait(); //wait for the clock to stabilize while(!clocks_lock_detect()); diff --git a/firmware/zpu/lib/eth_addrs.c b/firmware/zpu/lib/eth_addrs.c index c45ce7559..6d3347cf3 100644 --- a/firmware/zpu/lib/eth_addrs.c +++ b/firmware/zpu/lib/eth_addrs.c @@ -1,5 +1,5 @@ /* - * Copyright 2010-2011 Ettus Research LLC + * Copyright 2010-2012 Ettus Research LLC * Copyright 2007 Free Software Foundation, Inc. * * This program is free software: you can redistribute it and/or modify @@ -20,6 +20,7 @@ #include "memory_map.h" #include "nonstdio.h" #include <stdbool.h> +#include <string.h> #include "i2c.h" #include "usrp2/fw_common.h" @@ -37,104 +38,69 @@ unprogrammed(const void *t, size_t len) return all_ones | all_zeros; } -//////////////////// MAC Addr Stuff /////////////////////// +typedef struct{ + eth_mac_addr_t mac_addr; + struct ip_addr ip_addr; + struct ip_addr gateway; + struct ip_addr subnet; +} eth_addrs_t; -static bool src_mac_addr_initialized = false; +static bool eth_addrs_initialized = false; -static const eth_mac_addr_t default_mac_addr = {{ - 0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff - }}; +static const eth_addrs_t default_eth_addrs = { + .mac_addr = {{0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff}}, + .ip_addr = {(192 << 24 | 168 << 16 | 10 << 8 | 2 << 0)}, + .gateway = {(192 << 24 | 168 << 16 | 10 << 8 | 1 << 0)}, + .subnet = {(255 << 24 | 255 << 16 | 255 << 8 | 0 << 0)}, +}; -static eth_mac_addr_t src_mac_addr = {{ - 0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff - }}; - -void set_default_mac_addr(void) -{ - src_mac_addr_initialized = true; - src_mac_addr = default_mac_addr; -} +static eth_addrs_t current_eth_addrs; -const eth_mac_addr_t * -ethernet_mac_addr(void) -{ - if (!src_mac_addr_initialized){ // fetch from eeprom - src_mac_addr_initialized = true; +static void eth_addrs_init(void){ + if (eth_addrs_initialized) return; + eth_addrs_initialized = true; - // if we're simulating, don't read the EEPROM model, it's REALLY slow - if (hwconfig_simulation_p()) - return &src_mac_addr; - - eth_mac_addr_t tmp; - bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, &tmp, sizeof(tmp)); - if (!ok || unprogrammed(&tmp, sizeof(tmp))){ - // use the default + #define eth_addrs_init_x(addr, x){ \ + const bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, addr, ¤t_eth_addrs.x, sizeof(current_eth_addrs.x)); \ + if (!ok || unprogrammed(¤t_eth_addrs.x, sizeof(current_eth_addrs.x))){ \ + memcpy(¤t_eth_addrs.x, &default_eth_addrs.x, sizeof(current_eth_addrs.x)); \ + } \ } - else - src_mac_addr = tmp; - } - return &src_mac_addr; -} + eth_addrs_init_x(USRP2_EE_MBOARD_MAC_ADDR, mac_addr); + eth_addrs_init_x(USRP2_EE_MBOARD_IP_ADDR, ip_addr); + eth_addrs_init_x(USRP2_EE_MBOARD_GATEWAY, gateway); + eth_addrs_init_x(USRP2_EE_MBOARD_SUBNET, subnet); -bool -ethernet_set_mac_addr(const eth_mac_addr_t *t) -{ - bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, t, sizeof(eth_mac_addr_t)); - if (ok){ - src_mac_addr = *t; - src_mac_addr_initialized = true; - //eth_mac_set_addr(t); //this breaks the link - } - - return ok; } -//////////////////// IP Addr Stuff /////////////////////// - -static bool src_ip_addr_initialized = false; - -static const struct ip_addr default_ip_addr = { - (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0) -}; - -static struct ip_addr src_ip_addr = { - (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0) -}; - -void set_default_ip_addr(void) -{ - src_ip_addr_initialized = true; - src_ip_addr = default_ip_addr; +const eth_mac_addr_t *ethernet_mac_addr(void){ + eth_addrs_init(); + return ¤t_eth_addrs.mac_addr; } -const struct ip_addr *get_ip_addr(void) -{ - if (!src_ip_addr_initialized){ // fetch from eeprom - src_ip_addr_initialized = true; - - // if we're simulating, don't read the EEPROM model, it's REALLY slow - if (hwconfig_simulation_p()) - return &src_ip_addr; +const struct ip_addr *get_ip_addr(void){ + eth_addrs_init(); + return ¤t_eth_addrs.ip_addr; +} - struct ip_addr tmp; - bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, &tmp, sizeof(tmp)); - if (!ok || unprogrammed(&tmp, sizeof(tmp))){ - // use the default - } - else - src_ip_addr = tmp; - } +const struct ip_addr *get_subnet(void){ + eth_addrs_init(); + return ¤t_eth_addrs.subnet; +} - return &src_ip_addr; +const struct ip_addr *get_gateway(void){ + eth_addrs_init(); + return ¤t_eth_addrs.gateway; } bool set_ip_addr(const struct ip_addr *t){ - bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, t, sizeof(struct ip_addr)); - if (ok){ - src_ip_addr = *t; - src_ip_addr_initialized = true; - } + const bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, t, sizeof(struct ip_addr)); + if (ok) current_eth_addrs.ip_addr = *t; + return ok; +} - return ok; +void eth_addrs_set_default(void){ + eth_addrs_initialized = true; + memcpy(¤t_eth_addrs, &default_eth_addrs, sizeof(default_eth_addrs)); } diff --git a/firmware/zpu/lib/ethernet.h b/firmware/zpu/lib/ethernet.h index 52b297349..b5b08cb8c 100644 --- a/firmware/zpu/lib/ethernet.h +++ b/firmware/zpu/lib/ethernet.h @@ -1,5 +1,5 @@ -/* -*- c -*- */ /* + * Copyright 2010-2012 Ettus Research LLC * Copyright 2007 Free Software Foundation, Inc. * * This program is free software: you can redistribute it and/or modify @@ -44,27 +44,28 @@ void ethernet_register_link_changed_callback(ethernet_link_changed_callback_t cb */ const eth_mac_addr_t *ethernet_mac_addr(void); -/*!set mac addr to default*/ -void set_default_mac_addr(void); - /*! - * \brief write mac address to eeprom and begin using it + * \returns IP address */ -bool ethernet_set_mac_addr(const eth_mac_addr_t *t); +const struct ip_addr *get_ip_addr(void); /*! - * \returns IP address + * \returns gateway address */ -const struct ip_addr *get_ip_addr(void); +const struct ip_addr *get_gateway(void); -/*!set ip addr to default*/ -void set_default_ip_addr(void); +/*! + * \returns subnet address + */ +const struct ip_addr *get_subnet(void); /*! * \brief write ip address to eeprom and begin using it */ bool set_ip_addr(const struct ip_addr *t); +//! Apply default settings to eth addrs +void eth_addrs_set_default(void); /* * \brief read RMON regs and return error mask diff --git a/firmware/zpu/lib/memory_map.h b/firmware/zpu/lib/memory_map.h index 9d47522ca..4290ee20a 100644 --- a/firmware/zpu/lib/memory_map.h +++ b/firmware/zpu/lib/memory_map.h @@ -1,4 +1,4 @@ -// Copyright 2010-2011 Ettus Research LLC +// Copyright 2010-2012 Ettus Research LLC /* * Copyright 2007,2008,2009 Free Software Foundation, Inc. * @@ -49,18 +49,6 @@ // SPI Core, Slave 2. See core docs for more info ///////////////////////////////////////////////////// -typedef struct { - volatile uint32_t txrx0; - volatile uint32_t txrx1; - volatile uint32_t txrx2; - volatile uint32_t txrx3; - volatile uint32_t ctrl; - volatile uint32_t div; - volatile uint32_t ss; -} spi_regs_t; - -#define spi_regs ((spi_regs_t *) SPI_BASE) - // Masks for controlling different peripherals #define SPI_SS_AD9510 1 #define SPI_SS_AD9777 2 @@ -124,7 +112,8 @@ typedef struct { /////////////////////////////////////////////////// typedef struct { - volatile uint32_t _padding[8]; + volatile uint32_t spi; + volatile uint32_t _padding[7]; volatile uint32_t status; volatile uint32_t _unused; volatile uint32_t time64_secs_rb; @@ -133,7 +122,10 @@ typedef struct { volatile uint32_t irqs; } router_status_t; +#define SPI_READY_IRQ (1 << 12) + #define router_status ((router_status_t *) READBACK_BASE) +#define readback_mux ((router_status_t *) READBACK_BASE) //alias with a better name /*! * \brief return non-zero if we're running under the simulator @@ -207,7 +199,7 @@ typedef struct { #define SR_SIMTIMER 8 // 2 #define SR_TIME64 10 // 6 #define SR_BUF_POOL 16 // 4 - +#define SR_SPI_CORE 20 // 3 #define SR_RX_FRONT 24 // 5 #define SR_RX_CTRL0 32 // 9 #define SR_RX_DSP0 48 // 7 @@ -224,6 +216,21 @@ typedef struct { #define SR_ADDR_BLDRDONE _SR_ADDR(5) +// --- spi core control regs --- + +typedef struct { + volatile uint32_t divider; + volatile uint32_t control; + volatile uint32_t data; +} spi_core_t; + +#define SPI_CORE_SLAVE_SELECT_SHIFT 0 +#define SPI_CORE_NUM_BITS_SHIFT 24 +#define SPI_CORE_DATA_IN_EDGE_SHIFT 30 +#define SPI_CORE_DATA_OUT_EDGE_SHIFT 31 + +#define spi_core ((spi_core_t *) _SR_ADDR(SR_SPI_CORE)) + // --- packet router control regs --- typedef struct { diff --git a/firmware/zpu/lib/net_common.c b/firmware/zpu/lib/net_common.c index 42e365393..9b75006d3 100644 --- a/firmware/zpu/lib/net_common.c +++ b/firmware/zpu/lib/net_common.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2011 Ettus Research LLC + * Copyright 2009-2012 Ettus Research LLC * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -374,6 +374,22 @@ send_arp_reply(struct arp_eth_ipv4 *req, eth_mac_addr_t our_mac) send_pkt(t, ETHERTYPE_ARP, &reply, sizeof(reply), 0, 0, 0, 0); } +void net_common_send_arp_request(const struct ip_addr *addr){ + struct arp_eth_ipv4 req _AL4; + req.ar_hrd = ARPHRD_ETHER; + req.ar_pro = ETHERTYPE_IPV4; + req.ar_hln = sizeof(eth_mac_addr_t); + req.ar_pln = sizeof(struct ip_addr); + req.ar_op = ARPOP_REQUEST; + memcpy(req.ar_sha, ethernet_mac_addr(), sizeof(eth_mac_addr_t)); + memcpy(req.ar_sip, get_ip_addr(), sizeof(struct ip_addr)); + memset(req.ar_tha, 0x00, sizeof(eth_mac_addr_t)); + memcpy(req.ar_tip, addr, sizeof(struct ip_addr)); + + //send the request with a broadcast ethernet mac address + send_pkt(BCAST_MAC_ADDR, ETHERTYPE_ARP, &req, sizeof(req), 0, 0, 0, 0); +} + void send_gratuitous_arp(void){ struct arp_eth_ipv4 req _AL4; req.ar_hrd = ARPHRD_ETHER; @@ -415,7 +431,15 @@ handle_arp_packet(struct arp_eth_ipv4 *p, size_t size) || p->ar_hln != 6 || p->ar_pln != 4) return; - + + if (p->ar_op == ARPOP_REPLY){ + struct ip_addr ip_addr; + memcpy(&ip_addr, p->ar_sip, sizeof(ip_addr)); + eth_mac_addr_t mac_addr; + memcpy(&mac_addr, p->ar_sha, sizeof(mac_addr)); + arp_cache_update(&ip_addr, &mac_addr); + } + if (p->ar_op != ARPOP_REQUEST) return; diff --git a/firmware/zpu/lib/net_common.h b/firmware/zpu/lib/net_common.h index 3cbc5c514..5e6daf689 100644 --- a/firmware/zpu/lib/net_common.h +++ b/firmware/zpu/lib/net_common.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2011 Ettus Research LLC + * Copyright 2009-2012 Ettus Research LLC * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -55,4 +55,7 @@ void handle_eth_packet(uint32_t *p, size_t nlines); void send_gratuitous_arp(void); +//! Send an ARP request for the given IP address +void net_common_send_arp_request(const struct ip_addr *addr); + #endif /* INCLUDED_NET_COMMON_H */ diff --git a/firmware/zpu/lib/spi.c b/firmware/zpu/lib/spi.c index af0d8a68f..6f2f74899 100644 --- a/firmware/zpu/lib/spi.c +++ b/firmware/zpu/lib/spi.c @@ -1,4 +1,5 @@ /* + * Copyright 2012 Ettus Research LLC * Copyright 2007,2008 Free Software Foundation, Inc. * * This program is free software: you can redistribute it and/or modify @@ -17,94 +18,38 @@ #include "spi.h" #include "memory_map.h" -#include "pic.h" #include "nonstdio.h" -//void (*volatile spi_callback)(void); //SPI callback when xfer complete. - -//static void spi_irq_handler(unsigned irq); - -void -spi_init(void) +void spi_init(void) { - /* - * f_sclk = f_wb / ((div + 1) * 2) - */ - spi_regs->div = 1; // 0 = Div by 2 (25 MHz); 1 = Div-by-4 (12.5 MHz) + spi_core->divider = 10; } -void -spi_wait(void) +void spi_wait(void) { - while (spi_regs->ctrl & SPI_CTRL_GO_BSY) - ; + while ((readback_mux->irqs & SPI_READY_IRQ) == 0){ + //NOP + } } -uint32_t -spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags) +uint32_t spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags) { - flags &= (SPI_CTRL_TXNEG | SPI_CTRL_RXNEG); - int ctrl = SPI_CTRL_ASS | (SPI_CTRL_CHAR_LEN_MASK & length) | flags; - - spi_wait(); - - // Tell it which SPI slave device to access - spi_regs->ss = slave & 0xffff; - - // Data we will send - spi_regs->txrx0 = data; + uint32_t control_word = 0; + control_word |= (slave << SPI_CORE_SLAVE_SELECT_SHIFT); + control_word |= (length << SPI_CORE_NUM_BITS_SHIFT); + if ((flags & SPI_PUSH_RISE) != 0) control_word |= (1 << SPI_CORE_DATA_OUT_EDGE_SHIFT); + if ((flags & SPI_PUSH_FALL) != 0) control_word |= (0 << SPI_CORE_DATA_OUT_EDGE_SHIFT); + if ((flags & SPI_LATCH_RISE) != 0) control_word |= (1 << SPI_CORE_DATA_IN_EDGE_SHIFT); + if ((flags & SPI_LATCH_FALL) != 0) control_word |= (0 << SPI_CORE_DATA_IN_EDGE_SHIFT); - // Run it -- write once and rewrite with GO set - spi_regs->ctrl = ctrl; - spi_regs->ctrl = ctrl | SPI_CTRL_GO_BSY; + const uint32_t data_out = data << (32 - length); - if(readback) { spi_wait(); - return spi_regs->txrx0; - } - else - return 0; -} + spi_core->control = control_word; + spi_core->data = data_out; -/* -void spi_register_callback(void (*volatile callback)(void)) { - spi_callback = callback; -} - -static void spi_irq_handler(unsigned irq) { -// printf("SPI IRQ handler\n"); -// uint32_t wat = spi_regs->ctrl; //read a register just to clear the interrupt - //spi_regs->ctrl &= ~SPI_CTRL_IE; - if(spi_callback) spi_callback(); //we could just use the PIC to register the user's callback, but this provides the ability to do other things later -} + if (!readback) return 0; -uint32_t spi_get_data(void) { - return spi_regs->txrx0; -} - -bool -spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void)) { - flags &= (SPI_CTRL_TXNEG | SPI_CTRL_RXNEG); - int ctrl = SPI_CTRL_ASS | SPI_CTRL_IE | (SPI_CTRL_CHAR_LEN_MASK & length) | flags; - - if(spi_regs->ctrl & SPI_CTRL_GO_BSY) { - printf("Async SPI busy!\n"); - return false; //we don't wait on busy, we just return failure. we count on the host to not set up another transaction before the last one finishes. - } - - // Tell it which SPI slave device to access - spi_regs->ss = slave & 0xffff; - - // Data we will send - spi_regs->txrx0 = data; - - spi_register_callback(callback); - pic_register_handler(IRQ_SPI, spi_irq_handler); - - // Run it -- write once and rewrite with GO set - spi_regs->ctrl = ctrl; - spi_regs->ctrl = ctrl | SPI_CTRL_GO_BSY; - - return true; + spi_wait(); + return readback_mux->spi; } -*/ diff --git a/firmware/zpu/lib/spi.h b/firmware/zpu/lib/spi.h index 71245150a..125e1a502 100644 --- a/firmware/zpu/lib/spi.h +++ b/firmware/zpu/lib/spi.h @@ -1,5 +1,5 @@ -/* -*- c -*- */ /* + * Copyright 2012 Ettus Research LLC * Copyright 2006,2007 Free Software Foundation, Inc. * * This program is free software: you can redistribute it and/or modify @@ -19,8 +19,8 @@ #ifndef INCLUDED_SPI_H #define INCLUDED_SPI_H -#include <memory_map.h> #include <stdbool.h> +#include <stdint.h> /*! * \brief One time call to initialize SPI @@ -39,39 +39,11 @@ void spi_wait(void); /* * Flags for spi_transact */ -#define SPIF_PUSH_RISE 0 // push tx data on rising edge of SCLK -#define SPIF_PUSH_FALL SPI_CTRL_TXNEG // push tx data on falling edge of SCLK -#define SPIF_LATCH_RISE 0 // latch rx data on rising edge of SCLK -#define SPIF_LATCH_FALL SPI_CTRL_RXNEG // latch rx data on falling edge of SCLK - - -uint32_t -spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags); - -//uint32_t spi_get_data(void); -//static void spi_irq_handler(unsigned irq); -//void spi_register_callback(void (*volatile callback)(void)); - -//bool -//spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void)); - -// ---------------------------------------------------------------- -// Routines that manipulate the FLASH SPI BUS -// ---------------------------------------------------------------- - -/*! - * \brief One time call to initialize SPI - */ -void spif_init(void); - -/*! - * \brief Wait for last SPI transaction to complete. - * Unless you need to know it completed, it's not necessary to call this. - */ -void spif_wait(void); - -uint32_t -spif_transact(bool readback_, int slave, uint32_t data, int length, uint32_t flags); +#define SPI_PUSH_RISE (1 << 0) // push tx data on rising edge of SCLK +#define SPI_PUSH_FALL (1 << 1) // push tx data on falling edge of SCLK +#define SPI_LATCH_RISE (1 << 2) // latch rx data on rising edge of SCLK +#define SPI_LATCH_FALL (1 << 3) // latch rx data on falling edge of SCLK +uint32_t spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags); #endif /* INCLUDED_SPI_H */ diff --git a/firmware/zpu/lib/u2_init.c b/firmware/zpu/lib/u2_init.c index 71bd2c594..77c8c0722 100644 --- a/firmware/zpu/lib/u2_init.c +++ b/firmware/zpu/lib/u2_init.c @@ -51,6 +51,7 @@ u2_init(void) hal_enable_ints(); // flash all leds to let us know board is alive +#ifndef BOOTLOADER hal_set_led_src(0x0, 0x1f); /* software ctrl */ hal_set_leds(0x0, 0x1f); mdelay(300); hal_set_leds(LED_E, LED_E); mdelay(300); @@ -61,6 +62,7 @@ u2_init(void) hal_set_leds(0x0, 0x1f); mdelay(100); hal_set_leds(blinks, 0x1f); mdelay(100); } +#endif hal_set_led_src(0x1f & ~LED_D, 0x1f); /* hardware ctrl */ hal_set_leds(LED_D, 0x1f); // Leave one on diff --git a/firmware/zpu/usrp2p/spi_flash.c b/firmware/zpu/usrp2p/spi_flash.c index 9406f8042..09f908edb 100644 --- a/firmware/zpu/usrp2p/spi_flash.c +++ b/firmware/zpu/usrp2p/spi_flash.c @@ -1,7 +1,6 @@ -/* -*- c++ -*- */ /* * Copyright 2009 Free Software Foundation, Inc. - * Copyright 2009-2011 Ettus Research LLC + * Copyright 2009-2012 Ettus Research LLC * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,6 +16,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "spi_flash.h" #include "spi_flash_private.h" //#include <stdlib.h> #include <nonstdio.h> diff --git a/firmware/zpu/usrp2p/spi_flash.h b/firmware/zpu/usrp2p/spi_flash.h index a10533e08..8a8facdca 100644 --- a/firmware/zpu/usrp2p/spi_flash.h +++ b/firmware/zpu/usrp2p/spi_flash.h @@ -23,10 +23,18 @@ #include <stdint.h> #include <stdbool.h> - #define SPI_FLASH_PAGE_SIZE 256 #define SPI_SS_FLASH 1 +#define SPIF_PUSH_RISE 0 // push tx data on rising edge of SCLK +#define SPIF_PUSH_FALL SPI_CTRL_TXNEG // push tx data on falling edge of SCLK +#define SPIF_LATCH_RISE 0 // latch rx data on rising edge of SCLK +#define SPIF_LATCH_FALL SPI_CTRL_RXNEG // latch rx data on falling edge of SCLK + +void spif_init(void); +void spif_wait(void); + +uint32_t spif_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags); uint32_t spi_flash_rdid(void); /* Read ID */ uint32_t spi_flash_rdsr(void); /* Read Status Register */ diff --git a/firmware/zpu/usrp2p/spif.c b/firmware/zpu/usrp2p/spif.c index 91da73155..60807ca4a 100644 --- a/firmware/zpu/usrp2p/spif.c +++ b/firmware/zpu/usrp2p/spif.c @@ -21,6 +21,7 @@ */ #include "spi.h" +#include "spi_flash.h" #include "memory_map.h" void diff --git a/firmware/zpu/usrp2p/u2p_init.c b/firmware/zpu/usrp2p/u2p_init.c index 381987ae6..1890dd726 100644 --- a/firmware/zpu/usrp2p/u2p_init.c +++ b/firmware/zpu/usrp2p/u2p_init.c @@ -24,7 +24,6 @@ void u2p_init(void){ bool safe_fw = find_safe_booted_flag(); set_safe_booted_flag(0); if (safe_fw) { - set_default_ip_addr(); - set_default_mac_addr(); + eth_addrs_set_default(); } } diff --git a/firmware/zpu/usrp2p/udp_fw_update.c b/firmware/zpu/usrp2p/udp_fw_update.c index 5689388a8..cd9e7d902 100644 --- a/firmware/zpu/usrp2p/udp_fw_update.c +++ b/firmware/zpu/usrp2p/udp_fw_update.c @@ -1,6 +1,5 @@ -/* -*- c++ -*- */ /* - * Copyright 2010 Ettus Research LLC + * Copyright 2010-2012 Ettus Research LLC * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,6 +18,7 @@ //Routines to handle updating the SPI Flash firmware via UDP #include <net_common.h> +#include "memory_map.h" #include "usrp2/fw_common.h" #include "spi.h" #include "spi_flash.h" |