diff options
Diffstat (limited to 'firmware/zpu/lib/if_arp.h')
| -rw-r--r-- | firmware/zpu/lib/if_arp.h | 153 | 
1 files changed, 153 insertions, 0 deletions
diff --git a/firmware/zpu/lib/if_arp.h b/firmware/zpu/lib/if_arp.h new file mode 100644 index 000000000..63519c4be --- /dev/null +++ b/firmware/zpu/lib/if_arp.h @@ -0,0 +1,153 @@ +/* + * INET		An implementation of the TCP/IP protocol suite for the LINUX + *		operating system.  INET is implemented using the  BSD Socket + *		interface as the means of communication with the user level. + * + *		Global definitions for the ARP (RFC 826) protocol. + * + * Version:	@(#)if_arp.h	1.0.1	04/16/93 + * + * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988 + *		Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source. + *		Ross Biro + *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + *		Florian La Roche, + *		Jonathan Layes <layes@loran.com> + *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25 + * + *		This program is free software; you can redistribute it and/or + *		modify it under the terms of the GNU General Public License + *		as published by the Free Software Foundation; either version + *		2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_IF_ARP_H +#define _LINUX_IF_ARP_H + +/* ARP protocol HARDWARE identifiers. */ +#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/ +#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/ +#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/ +#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/ +#define	ARPHRD_PRONET	4		/* PROnet token ring		*/ +#define	ARPHRD_CHAOS	5		/* Chaosnet			*/ +#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/ +#define	ARPHRD_ARCNET	7		/* ARCnet			*/ +#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/ +#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/ +#define ARPHRD_ATM	19		/* ATM 				*/ +#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/ +#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/ +#define ARPHRD_EUI64	27		/* EUI-64                       */ +#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/ + +/* Dummy types for non ARP hardware */ +#define ARPHRD_SLIP	256 +#define ARPHRD_CSLIP	257 +#define ARPHRD_SLIP6	258 +#define ARPHRD_CSLIP6	259 +#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/ +#define ARPHRD_ADAPT	264 +#define ARPHRD_ROSE	270 +#define ARPHRD_X25	271		/* CCITT X.25			*/ +#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/ +#define ARPHRD_CAN	280		/* Controller Area Network      */ +#define ARPHRD_PPP	512 +#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/ +#define ARPHRD_HDLC	ARPHRD_CISCO +#define ARPHRD_LAPB	516		/* LAPB				*/ +#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */ +#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/ + +#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/ +#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/ +#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */ +#define ARPHRD_SKIP	771		/* SKIP vif			*/ +#define ARPHRD_LOOPBACK	772		/* Loopback device		*/ +#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/ +#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */ +#define ARPHRD_BIF      775             /* AP1000 BIF                   */ +#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/ +#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/ +#define ARPHRD_IPGRE	778		/* GRE over IP			*/ +#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/ +#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */ +#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/ +#define ARPHRD_ECONET	782		/* Acorn Econet			*/ +#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/ +/* ARP works differently on different FC media .. so  */ +#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/ +#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */ +#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/ +#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/ +	/* 787->799 reserved for fibrechannel media types */ +#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/ +#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/ +#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */ +#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */ + +#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */ +#define ARPHRD_NONE	  0xFFFE	/* zero header length */ + +/* ARP protocol opcodes. */ +#define	ARPOP_REQUEST	1		/* ARP request			*/ +#define	ARPOP_REPLY	2		/* ARP reply			*/ +#define	ARPOP_RREQUEST	3		/* RARP request			*/ +#define	ARPOP_RREPLY	4		/* RARP reply			*/ +#define	ARPOP_InREQUEST	8		/* InARP request		*/ +#define	ARPOP_InREPLY	9		/* InARP reply			*/ +#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/ + + +/* ARP Flag values. */ +#define ATF_COM		0x02		/* completed entry (ha valid)	*/ +#define	ATF_PERM	0x04		/* permanent entry		*/ +#define	ATF_PUBL	0x08		/* publish entry		*/ +#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/ +#define ATF_NETMASK     0x20            /* want to use a netmask (only +					   for proxy entries) */ +#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/ + +typedef unsigned short  __be16; + +/* + *	This structure defines an ethernet arp header. + */ +struct arphdr +{ +	__be16		ar_hrd;		/* format of hardware address	*/ +	__be16		ar_pro;		/* format of protocol address	*/ +	unsigned char	ar_hln;		/* length of hardware address	*/ +	unsigned char	ar_pln;		/* length of protocol address	*/ +	__be16		ar_op;		/* ARP opcode (command)		*/ + +#if 0 +	 /* +	  *	 Ethernet looks like this : This bit is variable sized however... +	  */ +	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/ +	unsigned char		ar_sip[4];		/* sender IP address		*/ +	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/ +	unsigned char		ar_tip[4];		/* target IP address		*/ +#endif + +}; + +/* + *	This structure defines an ethernet arp header. + */ +struct arp_eth_ipv4 +{ +	__be16		ar_hrd;		/* format of hardware address	*/ +	__be16		ar_pro;		/* format of protocol address	*/ +	unsigned char	ar_hln;		/* length of hardware address	*/ +	unsigned char	ar_pln;		/* length of protocol address	*/ +	__be16		ar_op;		/* ARP opcode (command)		*/ + +	unsigned char	ar_sha[6];	/* sender hardware address	*/ +	unsigned char	ar_sip[4];	/* sender IP address		*/ +	unsigned char	ar_tha[6];	/* target hardware address	*/ +	unsigned char	ar_tip[4];	/* target IP address		*/ +}; + + +#endif	/* _LINUX_IF_ARP_H */  | 
