diff options
Diffstat (limited to 'firmware/fx2/common/fpga_regs_common.h')
| -rw-r--r-- | firmware/fx2/common/fpga_regs_common.h | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/firmware/fx2/common/fpga_regs_common.h b/firmware/fx2/common/fpga_regs_common.h new file mode 100644 index 000000000..b4a496af7 --- /dev/null +++ b/firmware/fx2/common/fpga_regs_common.h @@ -0,0 +1,150 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003,2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_FPGA_REGS_COMMON_H +#define INCLUDED_FPGA_REGS_COMMON_H + +// This file defines registers common to all FPGA configurations. +// Registers 0 to 31 are reserved for use in this file. + + +// The FPGA needs to know the rate that samples are coming from and +// going to the A/D's and D/A's. div = 128e6 / sample_rate + +#define FR_TX_SAMPLE_RATE_DIV 0 +#define FR_RX_SAMPLE_RATE_DIV 1 + +// 2 and 3 are defined in the ATR section + +#define FR_MASTER_CTRL 4 // master enable and reset controls +# define bmFR_MC_ENABLE_TX (1 << 0) +# define bmFR_MC_ENABLE_RX (1 << 1) +# define bmFR_MC_RESET_TX (1 << 2) +# define bmFR_MC_RESET_RX (1 << 3) + +// i/o direction registers for pins that go to daughterboards. +// Setting the bit makes it an output from the FPGA to the d'board. +// top 16 is mask, low 16 is value + +#define FR_OE_0 5 // slot 0 +#define FR_OE_1 6 +#define FR_OE_2 7 +#define FR_OE_3 8 + +// i/o registers for pins that go to daughterboards. +// top 16 is a mask, low 16 is value + +#define FR_IO_0 9 // slot 0 +#define FR_IO_1 10 +#define FR_IO_2 11 +#define FR_IO_3 12 + +#define FR_MODE 13 +# define bmFR_MODE_NORMAL 0 +# define bmFR_MODE_LOOPBACK (1 << 0) // enable digital loopback +# define bmFR_MODE_RX_COUNTING (1 << 1) // Rx is counting +# define bmFR_MODE_RX_COUNTING_32BIT (1 << 2) // Rx is counting with a 32 bit counter + // low and high 16 bits are multiplexed across channel I and Q + + +// If the corresponding bit is set, internal FPGA debug circuitry +// controls the i/o pins for the associated bank of daughterboard +// i/o pins. Typically used for debugging FPGA designs. + +#define FR_DEBUG_EN 14 +# define bmFR_DEBUG_EN_TX_A (1 << 0) // debug controls TX_A i/o +# define bmFR_DEBUG_EN_RX_A (1 << 1) // debug controls RX_A i/o +# define bmFR_DEBUG_EN_TX_B (1 << 2) // debug controls TX_B i/o +# define bmFR_DEBUG_EN_RX_B (1 << 3) // debug controls RX_B i/o + + +// If the corresponding bit is set, enable the automatic DC +// offset correction control loop. +// +// The 4 low bits are significant: +// +// ADC0 = (1 << 0) +// ADC1 = (1 << 1) +// ADC2 = (1 << 2) +// ADC3 = (1 << 3) +// +// This control loop works if the attached daugherboard blocks DC. +// Currently all daughterboards do block DC. This includes: +// basic rx, dbs_rx, tv_rx, flex_xxx_rx. + +#define FR_DC_OFFSET_CL_EN 15 // DC Offset Control Loop Enable + + +// offset corrections for ADC's and DAC's (2's complement) + +#define FR_ADC_OFFSET_0 16 +#define FR_ADC_OFFSET_1 17 +#define FR_ADC_OFFSET_2 18 +#define FR_ADC_OFFSET_3 19 + + +// ------------------------------------------------------------------------ +// Automatic Transmit/Receive switching +// +// If automatic transmit/receive (ATR) switching is enabled in the +// FR_ATR_CTL register, the presence or absence of data in the FPGA +// transmit fifo selects between two sets of values for each of the 4 +// banks of daughterboard i/o pins. +// +// Each daughterboard slot has 3 16-bit registers associated with it: +// FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_* +// +// FR_ATR_MASK_{0,1,2,3}: +// +// These registers determine which of the daugherboard i/o pins are +// affected by ATR switching. If a bit in the mask is set, the +// corresponding i/o bit is controlled by ATR, else it's output +// value comes from the normal i/o pin output register: +// FR_IO_{0,1,2,3}. +// +// FR_ATR_TXVAL_{0,1,2,3}: +// FR_ATR_RXVAL_{0,1,2,3}: +// +// If the Tx fifo contains data, then the bits from TXVAL that are +// selected by MASK are output. Otherwise, the bits from RXVAL that +// are selected by MASK are output. + +#define FR_ATR_MASK_0 20 // slot 0 +#define FR_ATR_TXVAL_0 21 +#define FR_ATR_RXVAL_0 22 + +#define FR_ATR_MASK_1 23 // slot 1 +#define FR_ATR_TXVAL_1 24 +#define FR_ATR_RXVAL_1 25 + +#define FR_ATR_MASK_2 26 // slot 2 +#define FR_ATR_TXVAL_2 27 +#define FR_ATR_RXVAL_2 28 + +#define FR_ATR_MASK_3 29 // slot 3 +#define FR_ATR_TXVAL_3 30 +#define FR_ATR_RXVAL_3 31 + +// Clock ticks to delay rising and falling edge of T/R signal +#define FR_ATR_TX_DELAY 2 +#define FR_ATR_RX_DELAY 3 + +#endif /* INCLUDED_FPGA_REGS_COMMON_H */ |