diff options
| -rw-r--r-- | usrp2/gpif/Makefile.srcs | 1 | ||||
| -rw-r--r-- | usrp2/gpif/packet_reframer.v | 29 | ||||
| -rw-r--r-- | usrp2/gpif/slave_fifo.v | 467 | ||||
| -rw-r--r-- | usrp2/top/B100/B100.ucf | 13 | ||||
| -rw-r--r-- | usrp2/top/B100/B100.v | 11 | ||||
| -rw-r--r-- | usrp2/top/B100/u1plus_core.v | 23 |
6 files changed, 509 insertions, 35 deletions
diff --git a/usrp2/gpif/Makefile.srcs b/usrp2/gpif/Makefile.srcs index bf2b7f74d..06cde8afa 100644 --- a/usrp2/gpif/Makefile.srcs +++ b/usrp2/gpif/Makefile.srcs @@ -11,4 +11,5 @@ gpif_wr.v \ gpif_rd.v \ packet_reframer.v \ packet_splitter.v \ +slave_fifo.v \ )) diff --git a/usrp2/gpif/packet_reframer.v b/usrp2/gpif/packet_reframer.v index 923d499ae..0d8232653 100644 --- a/usrp2/gpif/packet_reframer.v +++ b/usrp2/gpif/packet_reframer.v @@ -16,7 +16,7 @@ // -// Join vita packets longer than one GPIF frame, drop padding on short frames +// Join vita packets longer than one GPIF frame module packet_reframer (input clk, input reset, input clear, @@ -25,14 +25,16 @@ module packet_reframer output dst_rdy_o, output [18:0] data_o, output src_rdy_o, - input dst_rdy_i); + input dst_rdy_i, + output reg state, + output eof_out, + output reg [15:0] length); - reg [1:0] state; - reg [15:0] length; + //reg state; + //reg [15:0] length; localparam RF_IDLE = 0; localparam RF_PKT = 1; - localparam RF_DUMP = 2; always @(posedge clk) if(reset | clear) @@ -48,25 +50,22 @@ module packet_reframer RF_PKT : begin if(length == 2) - if(data_i[17]) - state <= RF_IDLE; - else - state <= RF_DUMP; + begin + state <= RF_IDLE; + length <= 0; + end else length <= length - 1; end - RF_DUMP : - if(data_i[17]) - state <= RF_IDLE; default : - state<= RF_IDLE; + state <= RF_IDLE; endcase // case (state) assign dst_rdy_o = dst_rdy_i; // this is a little pessimistic but ok - assign src_rdy_o = src_rdy_i & (state != RF_DUMP); + assign src_rdy_o = src_rdy_i; wire occ_out = 0; - wire eof_out = (state == RF_PKT) & (length == 2); + assign eof_out = (state == RF_PKT) & (length == 2); wire sof_out = (state == RF_IDLE); wire [15:0] data_out = data_i[15:0]; assign data_o = {occ_out, eof_out, sof_out, data_out}; diff --git a/usrp2/gpif/slave_fifo.v b/usrp2/gpif/slave_fifo.v new file mode 100644 index 000000000..2f98043ab --- /dev/null +++ b/usrp2/gpif/slave_fifo.v @@ -0,0 +1,467 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +////////////////////////////////////////////////////////////////////////////////// + +//this is a FIFO master interface for the FX2 in "slave fifo" mode. + +module slave_fifo + #(parameter TXFIFOSIZE = 12, parameter RXFIFOSIZE = 12) + (// GPIF signals + input gpif_clk, input gpif_rst, + inout [15:0] gpif_d, + input [3:0] gpif_ctl, + output sloe, output slrd, output slwr, output pktend, output [1:0] fifoadr, + + // Wishbone signals + input wb_clk, input wb_rst, + output [15:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso, + output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i, + input [7:0] triggers, + + input dsp_rx_run, + + // FIFO interface + input fifo_clk, input fifo_rst, input clear_tx, input clear_rx, + output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i, + input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o, + input [35:0] tx_err_data_i, input tx_err_src_rdy_i, output tx_err_dst_rdy_o, + output tx_underrun, output rx_overrun, + + input [15:0] test_len, input [7:0] test_rate, input [3:0] test_ctrl, + output [31:0] debug0, output [31:0] debug1 + ); + + // inputs to FPGA (all active low) + wire FX2_DE = ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA) + wire FX2_CE = ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB) + wire FX2_DF = ~gpif_ctl[2]; //EP6 FX2 FIFO full (FLAGC) + wire FX2_CF = ~gpif_ctl[3]; //EP8 FX2 FIFO full (FLAGD) + + wire [17:0] gpif_d_out_ctrl, gpif_d_out_data, gpif_d_out; + + // //////////////////////////////////////////////////////////////////// + // GPIF bus master state machine + + //transfer size for GPIF data. this can be anything really, it's specified only for + //fairness in bus sharing. 256 lines is 512 bytes over the wire, half the size of + //the double buffers in B100/B150. this should probably be a toplevel parameter or even + //a settings register value. + localparam data_transfer_size = 256; + localparam ctrl_transfer_size = 16; //probably unnecessary since ctrl xfers won't back up + + // state machine i/o to four fifos + //tx + wire ctrl_tx_dst_rdy; //sm input, ctrl tx path has space + wire ctrl_tx_src_rdy; //sm output, ctrl tx path enable + reg data_tx_dst_rdy; //sm input, data tx path has space + wire data_tx_src_rdy; //sm output, data tx path enable + + //rx + wire ctrl_rx_dst_rdy; //sm output, ctrl rx path enable + wire ctrl_rx_src_rdy; //sm input, ctrl rx path has space + wire data_rx_dst_rdy; //sm output, data rx path enable + wire data_rx_src_rdy; //sm input, data rx path has space + + reg [9:0] transfer_count; //number of lines (a line is 16 bits) in active transfer + + wire sop, eop; //SOP/EOP markers for TX data packets + + reg pktend_latch; + + reg [3:0] state; //state machine current state + localparam STATE_IDLE = 0; + localparam STATE_DATA_RX = 5; + localparam STATE_DATA_TX = 3; + localparam STATE_CTRL_RX = 6; + localparam STATE_CTRL_TX = 9; + localparam STATE_DATA_TX_SLOE = 2; + localparam STATE_CTRL_TX_SLOE = 8; + localparam STATE_DATA_RX_ADR = 1; + localparam STATE_CTRL_RX_ADR = 4; + localparam STATE_PKTEND = 7; + + //logs the last bus user for xfer fairness + //we only care about data rx vs. tx since ctrl pkts are so short + reg last_data_bus_hog; + localparam BUS_HOG_RX = 0; + localparam BUS_HOG_TX = 1; + + // ////////////////////////////////////////////////////////////// + // FX2 slave FIFO bus master state machine + // + always @(posedge gpif_clk) + if(gpif_rst) + state <= STATE_IDLE; + else + begin + case (state) + STATE_IDLE: + begin + transfer_count <= 0; + //handle transitions to other states + if(ctrl_tx_dst_rdy & ~FX2_CE) //if there's room in the ctrl fifo and the FX2 has ctrl data + state <= STATE_CTRL_TX_SLOE; + else if(ctrl_rx_src_rdy & ~FX2_CF) //if the ctrl fifo has data and the FX2 isn't full + state <= STATE_CTRL_RX_ADR; + else if(data_tx_dst_rdy & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX) //if there's room in the data fifo and the FX2 has data + state <= STATE_DATA_TX_SLOE; + else if(data_rx_src_rdy & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) //if the data fifo has data and the FX2 isn't full + state <= STATE_DATA_RX_ADR; + else if(data_tx_dst_rdy & ~FX2_DE) + state <= STATE_DATA_TX_SLOE; + else if(data_rx_src_rdy & ~FX2_DF) + state <= STATE_DATA_RX_ADR; + else if(~data_rx_src_rdy & ~dsp_rx_run & pktend_latch & ~FX2_DF) + state <= STATE_PKTEND; + + if(data_rx_src_rdy) + pktend_latch <= 1; + end + + STATE_DATA_TX_SLOE: //just to assert SLOE one cycle before SLRD + state <= STATE_DATA_TX; + STATE_CTRL_TX_SLOE: + state <= STATE_CTRL_TX; + + STATE_DATA_RX_ADR: //just to assert FIFOADR one cycle before SLWR + state <= STATE_DATA_RX; + STATE_CTRL_RX_ADR: + state <= STATE_CTRL_RX; + + STATE_DATA_RX: + begin + if((transfer_count == data_transfer_size) | FX2_DF | (~data_rx_src_rdy)) + state <= STATE_IDLE; + + transfer_count <= transfer_count + 1; + last_data_bus_hog <= BUS_HOG_RX; + end + + STATE_PKTEND: + begin + state <= STATE_IDLE; + pktend_latch <= 0; + end + + STATE_DATA_TX: + begin + if((transfer_count == data_transfer_size) | FX2_DE )/*| (~data_tx_dst_rdy))*/ + state <= STATE_IDLE; + transfer_count <= transfer_count + 1; + last_data_bus_hog <= BUS_HOG_TX; + end + STATE_CTRL_RX: + begin + if(FX2_CF | (~ctrl_rx_src_rdy)) + state <= STATE_IDLE; + transfer_count <= transfer_count + 1; + end + STATE_CTRL_TX: + begin + if(FX2_CE | (~ctrl_tx_dst_rdy)) + state <= STATE_IDLE; + transfer_count <= transfer_count + 1; + end + endcase + end + + // /////////////////////////////////////////////////////////////////// + // fifo signal assignments and enables + + //enable fifos + assign data_rx_dst_rdy = (state == STATE_DATA_RX); + assign data_tx_src_rdy = (state == STATE_DATA_TX); + assign ctrl_rx_dst_rdy = (state == STATE_CTRL_RX); + assign ctrl_tx_src_rdy = (state == STATE_CTRL_TX); + + //tx framing (this is super suspect) + //eop should be used only to set the EOP bit going into FIFOs + wire eop_data, eop_ctrl; + assign sop = (transfer_count == 0); + assign eop_data = (transfer_count == (data_transfer_size-1)); + assign eop_ctrl = (transfer_count == (ctrl_transfer_size-1)); + assign eop = (state == STATE_DATA_TX) ? eop_data : eop_ctrl; + + // //////////////////////////////////////////////////////////////////// + // set GPIF pins + + //set fifoadr to the appropriate endpoint + // {0,0}: EP2, data TX from host + // {0,1}: EP4, ctrl TX from host + // {1,0}: EP6, data RX to host + // {1,1}: EP8, ctrl RX to host + assign fifoadr = {(state == STATE_DATA_RX) | (state == STATE_CTRL_RX) | (state == STATE_DATA_RX_ADR) | (state == STATE_CTRL_RX_ADR) | (state == STATE_PKTEND), + (state == STATE_CTRL_RX) | (state == STATE_CTRL_RX_ADR) | (state == STATE_CTRL_TX) | (state == STATE_CTRL_TX_SLOE)}; + //set sloe, slwr, slrd (all active low) + //SLOE gets asserted when we want data from the FX2; i.e., TX mode + assign sloe = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX) | (state == STATE_DATA_TX_SLOE) | (state == STATE_CTRL_TX_SLOE)}; + //"read" and "write" here are from the master's point of view; + //so "read" means "transmit" and "write" means "receive" + assign slwr = ~{(state == STATE_DATA_RX) | (state == STATE_CTRL_RX)}; + assign slrd = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX)}; + + wire pktend_ctrl, pktend_data; + assign pktend_ctrl = ((~ctrl_rx_src_rdy | gpif_d_out_ctrl[17]) & (state == STATE_CTRL_RX)); + assign pktend_data = (state == STATE_PKTEND); + assign pktend = ~(pktend_ctrl | pktend_data); + + //mux between ctrl/data RX data out based on endpoint selection + assign gpif_d_out = fifoadr[0] ? gpif_d_out_ctrl : gpif_d_out_data; + // GPIF output data lines, tristate + assign gpif_d = sloe ? gpif_d_out : 16'bz; + + // //////////////////////////////////////////////////////////////////// + // TX Data Path + + wire [18:0] tx19_data; + wire tx19_src_rdy, tx19_dst_rdy; + wire [35:0] tx36_data; + wire tx36_src_rdy, tx36_dst_rdy; + wire [17:0] data_tx_int; + wire tx_src_rdy_int, tx_dst_rdy_int; + + wire [15:0] wr_fifo_space; + + always @(posedge gpif_clk) + if(gpif_rst) + data_tx_dst_rdy <= 0; + else + data_tx_dst_rdy <= wr_fifo_space >= 256; + + fifo_cascade #(.WIDTH(18), .SIZE(12)) wr_fifo + (.clk(gpif_clk), .reset(gpif_rst), .clear(0), + .datain({eop,sop,gpif_d}), .src_rdy_i(data_tx_src_rdy), .dst_rdy_o(/*data_tx_dst_rdy*/), .space(wr_fifo_space), + .dataout(data_tx_int), .src_rdy_o(tx_src_rdy_int), .dst_rdy_i(tx_dst_rdy_int), .occupied()); + + fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) wr_fifo_2clk + (.wclk(gpif_clk), .datain(data_tx_int), .src_rdy_i(tx_src_rdy_int), .dst_rdy_o(tx_dst_rdy_int), .space(), + .rclk(fifo_clk), .dataout(tx19_data[17:0]), .src_rdy_o(tx19_src_rdy), .dst_rdy_i(tx19_dst_rdy), .occupied(), + .arst(fifo_rst)); + + assign tx19_data[18] = 1'b0; + + // join vita packets which are longer than one frame, drop frame padding + wire [18:0] refr_data; + wire refr_src_rdy, refr_dst_rdy; + wire refr_state; + wire refr_eof; + wire [15:0] refr_len; + + packet_reframer tx_packet_reframer + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .data_i(tx19_data), .src_rdy_i(tx19_src_rdy), .dst_rdy_o(tx19_dst_rdy), + .data_o(refr_data), .src_rdy_o(refr_src_rdy), .dst_rdy_i(refr_dst_rdy), + .state(refr_state), .eof_out(refr_eof), .length(refr_len)); + + fifo19_to_fifo36 #(.LE(1)) f19_to_f36 + (.clk(fifo_clk), .reset(fifo_rst), .clear(0), + .f19_datain(refr_data), .f19_src_rdy_i(refr_src_rdy), .f19_dst_rdy_o(refr_dst_rdy), + .f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy)); + + fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy), + .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i)); + + // //////////////////////////////////////////// + // RX Data Path + + wire [35:0] rx36_data; + wire rx36_src_rdy, rx36_dst_rdy; + wire [18:0] rx19_data; + wire rx19_src_rdy, rx19_dst_rdy; + wire [15:0] rxfifospace; + + //deep 36 bit wide input fifo buffers from DSP + fifo_cascade #(.WIDTH(36), .SIZE(8)) rx_fifo36 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o), + .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy)); + + //convert to fifo19 + fifo36_to_fifo19 #(.LE(1)) f36_to_f19 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy), + .f19_dataout(rx19_data), .f19_src_rdy_o(rx19_src_rdy), .f19_dst_rdy_i(rx19_dst_rdy) ); + + wire [18:0] data_rx_int; + wire rx_src_rdy_int, rx_dst_rdy_int; + //clock domain crossing fifo for RX data + fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) rd_fifo_2clk + (.wclk(fifo_clk), .datain(rx19_data), .src_rdy_i(rx19_src_rdy), .dst_rdy_o(rx19_dst_rdy), .space(), + .rclk(~gpif_clk), .dataout(data_rx_int), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int), .occupied(), + .arst(fifo_rst)); + + //rd_fifo buffers writes to the 2clock fifo above + fifo_cascade #(.WIDTH(19), .SIZE(RXFIFOSIZE)) rd_fifo + (.clk(~gpif_clk), .reset(gpif_rst), .clear(0), + .datain(data_rx_int), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), .space(rxfifospace), + .dataout(gpif_d_out_data), .src_rdy_o(data_rx_src_rdy), .dst_rdy_i(data_rx_dst_rdy), .occupied()); + + // //////////////////////////////////////////////////////////////////// + // FIFO to Wishbone interface + + wire [18:0] resp_data, resp_int; + wire resp_src_rdy, resp_dst_rdy; + wire resp_src_rdy_int, resp_dst_rdy_int; + + wire [18:0] tx_err19_data; + wire tx_err19_src_rdy, tx_err19_dst_rdy; + + wire [18:0] ctrl_data; + wire ctrl_src_rdy, ctrl_dst_rdy; + + fifo_to_wb fifo_to_wb + (.clk(fifo_clk), .reset(fifo_rst), .clear(0), + .data_i(ctrl_data), .src_rdy_i(ctrl_src_rdy), .dst_rdy_o(ctrl_dst_rdy), + .data_o(resp_int), .src_rdy_o(resp_src_rdy_int), .dst_rdy_i(resp_dst_rdy_int), + .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), .wb_sel_o(wb_sel_o), + .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), .wb_ack_i(wb_ack_i), + .triggers(triggers), + .debug0(), .debug1()); + + // //////////////////////////////////////////////////////////////////// + // TX CTRL PATH (ctrl commands into Wishbone) + + //how does this use fifo_clk instead of wb_clk + //answer: on b100 fifo clk IS wb clk + fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) ctrl_fifo_2clk + (.wclk(gpif_clk), .datain({1'b0,eop,sop,gpif_d}), + .src_rdy_i(ctrl_tx_src_rdy), .dst_rdy_o(ctrl_tx_dst_rdy), .space(), + .rclk(fifo_clk), .dataout(ctrl_data), + .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy), .occupied(), + .arst(fifo_rst)); + + // //////////////////////////////////////////////////////////////////// + // RX CTRL PATH (async packets, ctrl response data) + + //tx_err_data_i is the 36wide tx async err data clocked on fifo_clk + fifo36_to_fifo19 #(.LE(1)) f36_to_f19_txerr + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .f36_datain(tx_err_data_i), .f36_src_rdy_i(tx_err_src_rdy_i), .f36_dst_rdy_o(tx_err_dst_rdy_o), + .f19_dataout(tx_err19_data), .f19_src_rdy_o(tx_err19_src_rdy), .f19_dst_rdy_i(tx_err19_dst_rdy) ); + + //mux FIFO-to-WB along with async tx err pkts into one ctrl resp fifo + //how is this clocked on wb_clk? + fifo19_mux #(.prio(0)) mux_err_stream + (.clk(wb_clk), .reset(wb_rst), .clear(0), + .data0_i(resp_int), .src0_rdy_i(resp_src_rdy_int), .dst0_rdy_o(resp_dst_rdy_int), + .data1_i(tx_err19_data), .src1_rdy_i(tx_err19_src_rdy), .dst1_rdy_o(tx_err19_dst_rdy), + .data_o(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy)); + + //clock domain crossing cascade fifo for mux_err_stream to get from wb_clk to gpif_clk + //the output of this fifo is CTRL DATA PENDING FOR GPIF + fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) resp_fifo_2clk + (.wclk(wb_clk), .datain(resp_data[17:0]), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), .space(), + .rclk(~gpif_clk), .dataout(gpif_d_out_ctrl), + .src_rdy_o(ctrl_rx_src_rdy), .dst_rdy_i(ctrl_rx_dst_rdy), .occupied(), + .arst(wb_rst)); + + + // //////////////////////////////////////////////////////////////////// + // Debug support, timed and loopback + // RX side muxes test data into the same stream + + /////////////////////////////////////////////////////////////////////// + // debug lines + wire [31:0] debug_rd, debug_wr, debug_split0, debug_split1; + + wire [35:0] timedrx_data, loopbackrx_data, testrx_data; + wire [35:0] timedtx_data, loopbacktx_data, testtx_data; + wire timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy, + testrx_src_rdy, testrx_dst_rdy; + wire timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy, + testtx_src_rdy, testtx_dst_rdy; + wire timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int; + + wire [31:0] total, crc_err, seq_err, len_err; + wire sel_testtx = test_ctrl[0]; + wire sel_loopbacktx = test_ctrl[1]; + wire pkt_src_enable = test_ctrl[2]; + wire pkt_sink_enable = test_ctrl[3]; +/* + fifo36_mux rx_test_mux_lvl_1 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy), + .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy), + .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy)); + + fifo36_mux rx_test_mux_lvl_2 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy), + .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), + .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); + + fifo_short #(.WIDTH(36)) loopback_fifo + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), + .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), + .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); + + // Crossbar used as a demux for switching TX stream to main DSP or to test logic + crossbar36 tx_crossbar_lvl_1 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .cross(sel_testtx), + .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), + .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input + .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), + .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) ); + + crossbar36 tx_crossbar_lvl_2 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .cross(sel_loopbacktx), + .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy), + .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input + .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy), + .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); + + // Fixed rate TX traffic consumer + fifo_pacer tx_pacer + (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable), + .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy), + .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int), + .underrun(tx_underrun), .overrun()); + + packet_verifier32 pktver32 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int), + .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); + + // Fixed rate RX traffic generator + vita_pkt_gen pktgen + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .len(test_len), + .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int)); + + fifo_pacer rx_pacer + (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable), + .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int), + .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy), + .underrun(), .overrun(rx_overrun)); +*/ + // //////////////////////////////////////////// + // DEBUG + + assign debug0 = { pktend_latch, data_rx_src_rdy, gpif_ctl[3:0], sloe, slrd, slwr, pktend, fifoadr[1:0], state[3:0], gpif_d[15:0]}; + //assign debug0 = { data_tx_src_rdy, data_tx_dst_rdy, tx_src_rdy_int, tx_dst_rdy_int, + // tx19_src_rdy, tx19_dst_rdy, refr_src_rdy, refr_dst_rdy, + // tx36_src_rdy, tx36_dst_rdy, + // gpif_ctl[3:0], fifoadr[1:0], + // wr_fifo_space[15:0]}; + assign debug1 = { 16'b0, transfer_count[7:0], ctrl_rx_src_rdy, ctrl_tx_dst_rdy, data_rx_src_rdy, + data_tx_dst_rdy, ctrl_tx_src_rdy, ctrl_rx_dst_rdy, data_tx_src_rdy, data_rx_dst_rdy}; +endmodule // slave_fifo diff --git a/usrp2/top/B100/B100.ucf b/usrp2/top/B100/B100.ucf index 69fd49971..c86501e72 100644 --- a/usrp2/top/B100/B100.ucf +++ b/usrp2/top/B100/B100.ucf @@ -43,17 +43,18 @@ NET "GPIF_D<2>" LOC = "N9" ; NET "GPIF_D<1>" LOC = "P9" ; NET "GPIF_D<0>" LOC = "P8" ; -NET "GPIF_CTL<3>" LOC = "N5" ; +##NET "GPIF_CTL<3>" LOC = "N5" ; +NET "GPIF_CTL<3>" LOC = "P12" ; NET "GPIF_CTL<2>" LOC = "M11" ; NET "GPIF_CTL<1>" LOC = "M9" ; NET "GPIF_CTL<0>" LOC = "M7" ; -NET "GPIF_RDY<3>" LOC = "N11" ; -NET "GPIF_RDY<2>" LOC = "T10" ; -NET "GPIF_RDY<1>" LOC = "T4" ; -NET "GPIF_RDY<0>" LOC = "R5" ; +##NET "GPIF_RDY<3>" LOC = "N11" ; +##NET "GPIF_RDY<2>" LOC = "T10" ; +NET "GPIF_SLWR" LOC = "T4" ; +NET "GPIF_SLRD" LOC = "R5" ; -NET "GPIF_CS" LOC = "P12" ; +##NET "GPIF_CS" LOC = "P12" ; NET "GPIF_SLOE" LOC = "R11" ; NET "GPIF_PKTEND" LOC = "P10" ; NET "GPIF_ADR<0>" LOC = "T11" ; diff --git a/usrp2/top/B100/B100.v b/usrp2/top/B100/B100.v index f2d75c54e..b5691d1c3 100644 --- a/usrp2/top/B100/B100.v +++ b/usrp2/top/B100/B100.v @@ -23,8 +23,8 @@ module B100 output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, // GPIF - inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY, - input [1:0] GPIF_ADR, output GPIF_CS, output GPIF_SLOE, output GPIF_PKTEND, + inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output GPIF_SLOE, + output [1:0] GPIF_ADR, output GPIF_SLWR, output GPIF_SLRD, output GPIF_PKTEND, input IFCLK, inout SDA_FPGA, inout SCL_FPGA, // I2C @@ -156,9 +156,10 @@ module B100 u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), .debug_txd(), .debug_rxd(1'b1), - .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY), - .gpif_misc({GPIF_CS,GPIF_SLOE,GPIF_PKTEND}), - .gpif_clk(IFCLK), + + .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_pktend(GPIF_PKTEND), + .gpif_sloe(GPIF_SLOE), .gpif_slwr(GPIF_SLWR), .gpif_slrd(GPIF_SLRD), + .gpif_fifoadr(GPIF_ADR), .gpif_clk(IFCLK), .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), diff --git a/usrp2/top/B100/u1plus_core.v b/usrp2/top/B100/u1plus_core.v index b9a7e55a2..1981123bc 100644 --- a/usrp2/top/B100/u1plus_core.v +++ b/usrp2/top/B100/u1plus_core.v @@ -23,8 +23,9 @@ module u1plus_core output debug_txd, input debug_rxd, // GPIF - inout [15:0] gpif_d, input [3:0] gpif_ctl, output [3:0] gpif_rdy, - output [2:0] gpif_misc, input gpif_clk, + inout [15:0] gpif_d, input [3:0] gpif_ctl, output gpif_sloe, + output gpif_slwr, output gpif_slrd, output gpif_pktend, output [1:0] gpif_fifoadr, + input gpif_clk, inout db_sda, inout db_scl, output sclk, output [15:0] sen, output mosi, input miso, @@ -36,8 +37,8 @@ module u1plus_core input pps_in ); - localparam TXFIFOSIZE = 11; - localparam RXFIFOSIZE = 11; + localparam TXFIFOSIZE = 12; + localparam RXFIFOSIZE = 12; // 64 total regs in address space localparam SR_RX_CTRL0 = 0; // 9 regs (+0 to +8) @@ -115,16 +116,21 @@ module u1plus_core setting_reg #(.my_addr(SR_CLEAR_TX_FIFO), .width(1)) sr_clear_tx (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(),.changed(clear_tx)); + + wire run_rx0, run_rx1; - gpif #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) - gpif (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d), - .gpif_ctl(gpif_ctl), .gpif_rdy(gpif_rdy), .gpif_misc(gpif_misc), + slave_fifo #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) + slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d), + .gpif_ctl(gpif_ctl), .sloe(gpif_sloe), .slwr(gpif_slwr), .slrd(gpif_slrd), + .pktend(gpif_pktend), .fifoadr(gpif_fifoadr), .wb_clk(wb_clk), .wb_rst(wb_rst), .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso), .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we), .wb_ack_i(m0_ack), .triggers(8'd0), + .dsp_rx_run(run_rx0 | run_rx1), + .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_tx), .clear_rx(clear_rx), .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy), .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), @@ -132,14 +138,13 @@ module u1plus_core .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif), - .frames_per_packet(frames_per_packet), + .test_len(0), .test_rate(0), .test_ctrl(0), .debug0(debug0), .debug1(debug1)); // ///////////////////////////////////////////////////////////////////////// // RX ADC Frontend, does IQ Balance, DC Offset, muxing wire [23:0] rx_fe_i, rx_fe_q; // 24 bits is total overkill here, but it matches u2/u2p - wire run_rx0, run_rx1; rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend (.clk(wb_clk),.rst(wb_rst), |