Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 79 insertions, 0 deletions

diff --git a/control_lib/wb_sim.v b/control_lib/wb_sim.v
new file mode 100644
index 000000000..b324e1457
--- /dev/null
+++ b/control_lib/wb_sim.v
@@ -0,0 +1,79 @@
+
+
+module wb_sim();
+   
+   wire wb_clk, wb_rst;
+   wire start;
+
+   reg 	POR, aux_clk, clk_fpga;
+   
+   initial POR = 1'b1;
+   initial #103 POR = 1'b0;
+
+   initial aux_clk = 1'b0;
+   always #25 aux_clk = ~aux_clk;
+
+   initial clk_fpga = 1'bx;
+   initial #3007 clk_fpga = 1'b0;
+   always #7 clk_fpga = ~clk_fpga;
+      
+   initial begin
+      $dumpfile("wb_sim.vcd");
+      $dumpvars(0,wb_sim);
+   end
+
+   initial #10000 $finish;
+
+   wire [15:0] rom_addr;
+   wire [47:0] rom_data;
+   wire [31:0] wb_dat;
+   wire [15:0] wb_adr;
+   wire        wb_cyc,wb_stb,wb_we,wb_ack;
+   wire [3:0]  wb_sel;
+   
+   wire [31:0] port_output;
+
+
+   system_control system_control(.dsp_clk(dsp_clk),
+				 .reset_out(reset_out),
+				 .wb_clk_o(wb_clk),
+				 .wb_rst_o(wb_rst),
+				 .wb_rst_o_alt(wb_rst_o_alt),
+				 .start	(start),
+				 .aux_clk(aux_clk),
+				 .clk_fpga(clk_fpga),
+				 .POR	(POR),
+				 .done	(done));
+   
+   clock_bootstrap_rom cbrom(.addr(rom_addr),.data(rom_data));
+
+   wb_bus_writer bus_writer(.rom_addr	(rom_addr[15:0]),
+			    .wb_dat_o	(wb_dat[31:0]),
+			    .wb_adr_o	(wb_adr[15:0]),
+			    .wb_cyc_o	(wb_cyc),
+			    .wb_sel_o	(wb_sel[3:0]),
+			    .wb_stb_o	(wb_stb),
+			    .wb_we_o	(wb_we),
+			    .start	(start),
+			    .done       (done),
+			    .rom_data	(rom_data[47:0]),
+			    .wb_clk_i	(wb_clk),
+			    .wb_rst_i	(wb_rst),
+			    .wb_ack_i	(wb_ack));
+
+   wb_output_pins32 output_pins(.wb_dat_o(),
+				.wb_ack_o(wb_ack),
+				.port_output(port_output[31:0]),
+				.wb_rst_i(wb_rst),
+				.wb_clk_i(wb_clk),
+				.wb_dat_i(wb_dat[31:0]),
+				.wb_we_i(wb_we),
+				.wb_sel_i(wb_sel[3:0]),
+				.wb_stb_i(wb_stb),
+				.wb_cyc_i(wb_cyc));
+   
+   
+   
+   
+endmodule // wb_sim
+