From 1fe1be7de91b011e24be0f773f7003adc54078d9 Mon Sep 17 00:00:00 2001 From: "Matthias P. Braendli" Date: Fri, 2 May 2014 15:31:11 +0200 Subject: Introduction and Origins --- appendix.tex | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'appendix.tex') diff --git a/appendix.tex b/appendix.tex index e366e7f..fd2169e 100644 --- a/appendix.tex +++ b/appendix.tex @@ -1,14 +1,14 @@ -\section{CRC-DABMUX ETI file formats} +\section{ODR-DabMux ETI file formats} \label{etiformat} -CRC-DABMUX supports three output formats for the ETI stream, that have been described on the mmbTools forum +ODR-DabMux supports three output formats for the ETI stream, that have been described on the mmbTools forum website.\footnote{\url{http://mmbtools.crc.ca/component/option,com\_fireboard/Itemid,55/func,view/id,4/catid,13/\#28}} The three formats are called \emph{framed}, \emph{streamed} and \emph{raw}. The \emph{framed} format is used for saving a finite ETI stream into a file. Each frame does not contain any padding, and the format can be described as follows: -\begin{lstlisting} +\begin{lstlisting} uint32_t nbFrames // for each frame uint16_t frameSize @@ -17,7 +17,7 @@ uint32_t nbFrames When streaming data, in which case the number of frames is not known in advance, the \emph{streamed} format can be used. This format is identical to the first one except for the missing \texttt{nbFrames}. -\begin{lstlisting} +\begin{lstlisting} // for each frame uint16_t frameSize uint8_t data[frameSize] @@ -25,7 +25,7 @@ This format is identical to the first one except for the missing \texttt{nbFrame The \emph{raw} format corresponds to ETI(NI), where each frame has a constant size of 6144 Bytes. The padding in this case is necessary. -\begin{lstlisting} +\begin{lstlisting} // for each frame uint8_t data[6144] \end{lstlisting} -- cgit v1.2.3